Via Caduti sul Lavoro, 6, 61032 Fano (PU), Italien +39 0721 1797741 info@ultramarwater.com
Hypershell-Dairy

Filmtec · Process

Hypershell-Dairy

DuPont™ FilmTec™ Hypershell™ Reverse Osmosis Elements for Dairy Applications DuPont™ FilmTec™ Hypershell™ reverse osmosis elements for dairy applications feature a full-fit configuration that minimizes stagnant areas for sanitary design. Thanks to a rigid, machined polypropylene outer shell, these elements do not deform, minimizing channeling and bypass compared to net-wrapped elements. Key specifications include advanced models […]

DuPont™ FilmTec™ Hypershell™ Reverse Osmosis Elements for Dairy Applications

DuPont™ FilmTec™ Hypershell™ reverse osmosis elements for dairy applications feature a full-fit configuration that minimizes stagnant areas for sanitary design. Thanks to a rigid, machined polypropylene outer shell, these elements do not deform, minimizing channeling and bypass compared to net-wrapped elements. Key specifications include advanced models such as the Hypershell™ XP RO-8038 element, which offers an active area of 385 ft² (35.8 m²) and a maximum operating pressure of 800 psi (54.8 bar).

Specifications

ProductPart numberActive areaFeed spacer thickness (mil)Max. recirculation crossflow, gpm (m³/h)Max. ΔP per element, psi (bar)
FilmTec™ Hypershell™ RO-8038302218370 ft² (34.4 m²)3380 (18.2)13 (0.9)
FilmTec™ Hypershell™ XP RO-803812119313385 ft² (35.8 m²)3380 (18.2)13 (0.9)
FilmTec™ Hypershell™ RO-8038/48360400290 ft² (27.0 m²)4880 (18.2)13 (0.9)
FilmTec™ Hypershell™ RO-390346364390 ft² (36.2 m²)2780 (18.2)13 (0.9)
FilmTec™ RO-3838/30-FF8058981 ft² (7.5 m²)3030 (6.8)15 (1.0)
FilmTec™ RO-3840/30-FF10866485 ft² (7.8 m²)3030 (6.8)15 (1.0)
Typical properties of FilmTec™ Hypershell™ elements for dairy applications.

Dimensions

DimensionHypershell™ RO-8038Hypershell™ RO-8038/48Hypershell™ RO-390RO-3838/30-FFRO-3840/30-FF
Length (A)38.00 in (965 mm)38.00 in (965 mm)40.00 in (1,016 mm)38.00 in (965 mm)38.75 in (984 mm)
B DIA7.9 in (200 mm)7.9 in (200 mm)7.9 in (200 mm)3.8 in (96 mm)3.8 in (96 mm)
C DIA1.125 in (28.58 mm)1.125 in (28.58 mm)1.125 in (28.58 mm)0.831 in (21.1 mm)0.831 in (21.1 mm)
Dimensions in inches (mm). 1 inch = 25.4 mm.

Operating limits for design

Maximum operating temperature122°F (50°C)
Maximum operating pressure800 psi (54.8 bar)
Maximum CIP pressure15–75 psi (1–5 bar)
pH range (continuous operation)2–11
pH range (short-term cleaning, 25°C)1.8–11 (at 122°F/50°C)
Hydrogen peroxide usage limit (continuous)20 ppm
Free chlorine toleranceNot detectable

Important operation notes

  • Keep elements moist at all times after initial wetting.
  • The maximum temperature for continuous operation above pH 10 is 95°F (35°C).
  • Oxidation damage is not covered by the warranty; DuPont recommends removing residual free chlorine by pretreatment.
  • Discard the permeate obtained during the first hour of operation.
  • Avoid static permeate-side backpressure at all times.

Private label and custom versions

DuPont™ FilmTec™ Hypershell™ elements are ideal for dewatering and concentration of milk, whey proteins and lactose, for concentration of process streams to reduce evaporator loads, and for polishing of RO/NF permeate and/or evaporator condensate. Contact our team for commercial inquiries, customization options and technical support.

Benötigen Sie diese Membran für Ihre Anlage?

Wir passen sie an Ihre Anlage an, versehen sie mit Ihrer Marke und begleiten Sie bei der Installation.

Angebot anfordern

Ähnliche Membranen

Adresse

Via Caduti sul Lavoro, 6
61032 Fano (PU), Italien