Via Caduti sul Lavoro, 6, 61032 Fano (PU), Italien +39 0721 1797741 info@ultramarwater.com
Fortilife-CR100i

Filmtec · Process

Fortilife-CR100i

DuPont™ FilmTec™ Fortilife™ CR100i Reverse Osmosis Element The DuPont™ FilmTec™ Fortilife™ CR100i brackish water reverse osmosis element offers excellent salt rejection and exceptional removal of silica, boron, nitrates, TOC and ammonium, combined with integrated iLEC™ interlocking endcaps that reduce operating costs and the risk of O-ring leaks. It features an ultra-low pressure drop design and […]

DuPont™ FilmTec™ Fortilife™ CR100i Reverse Osmosis Element

The DuPont™ FilmTec™ Fortilife™ CR100i brackish water reverse osmosis element offers excellent salt rejection and exceptional removal of silica, boron, nitrates, TOC and ammonium, combined with integrated iLEC™ interlocking endcaps that reduce operating costs and the risk of O-ring leaks. It features an ultra-low pressure drop design and high resistance to organic and biological fouling, reducing required cleanings by up to 50%. Key specifications include an active area of 400 ft² (37 m²), a permeate flow rate of 11,500 GPD (43.5 m³/d) and a stabilized salt rejection of 99.8%.

Specifications

FeatureValue / Technical data
Active area400 ft² (37 m²)
Feed spacer thickness34 mil
Permeate flow rate11,500 GPD (43.5 m³/d)
Stabilized salt rejection99.8%
Minimum salt rejection99.6%
Membrane typePolyamide Thin-Film Composite
General specifications of the Fortilife™ CR100i element.

Dimensions

DimensionImperialMetric
Net length (A)40.0 in1,016 mm
B DIA7.9 in201 mm
C DIA (ID)1.125 in ID29 mm ID
D0.5 in12.7 mm
Dimensions in inches (mm). 1 inch = 25.4 mm. Individual elements with iLEC™ endcaps measure 40.5 in (1,029 mm) in overall length.

Operating limits for design

Maximum operating temperature113°F (45°C)
Maximum operating pressure600 psi (41 bar)
Maximum pressure drop per element15 psi (1.0 bar)
Maximum pressure drop per pressure vessel (minimum 4 elements)50 psi (3.5 bar)
pH range (continuous operation)2–11
pH range (short-term cleaning, 30 min)1–13
Maximum feed flow rate75 gpm (17 m³/h)
Maximum feed silt density index (SDI)SDI 5
Free chlorine tolerance< 0.1 ppm

Important operation notes

  • Keep elements moist at all times after initial wetting.
  • The maximum temperature for continuous operation above pH 10 is 95°F (35°C).
  • Oxidation damage caused by free chlorine or other oxidizing agents is not covered by the warranty; pretreatment to remove free chlorine is recommended.
  • Discard the permeate obtained during the first hour of operation.
  • Use of this product does not by itself guarantee the removal of cysts and pathogens from water.

Private label and custom versions

The DuPont™ FilmTec™ Fortilife™ CR100i element is ideal for industrial and municipal wastewater reuse (such as textiles, steel and metals, chemical and petrochemical) and for demineralization of challenging feed waters. Contact our team for commercial inquiries, customization options and technical support.

Benötigen Sie diese Membran für Ihre Anlage?

Wir passen sie an Ihre Anlage an, versehen sie mit Ihrer Marke und begleiten Sie bei der Installation.

Angebot anfordern

Ähnliche Membranen

Adresse

Via Caduti sul Lavoro, 6
61032 Fano (PU), Italien