Via Caduti sul Lavoro, 6, 61032 Fano (PU), Italien +39 0721 1797741 info@ultramarwater.com
HSRO-4040-FF

Filmtec · Process

HSRO-4040-FF

DuPont™ FilmTec™ HSRO-4040-FF Hot Water Sanitizable Reverse Osmosis Element The DuPont™ FilmTec™ HSRO-4040-FF hot water sanitizable reverse osmosis element delivers exceptional water quality with the added ability to withstand hot water sanitization, eliminating the need for chemical disinfectants. It features a high active membrane area and a full-fit configuration that helps minimize stagnant areas in […]

Durchmesser
4″
Format
4040

DuPont™ FilmTec™ HSRO-4040-FF Hot Water Sanitizable Reverse Osmosis Element

The DuPont™ FilmTec™ HSRO-4040-FF hot water sanitizable reverse osmosis element delivers exceptional water quality with the added ability to withstand hot water sanitization, eliminating the need for chemical disinfectants. It features a high active membrane area and a full-fit configuration that helps minimize stagnant areas in sanitary applications. Key specifications include an active area of 90 ft² (8.4 m²), a permeate flow rate of 2,900 GPD (11 m³/d) and a minimum salt rejection of 97%.

Specifications

FeatureValue / Technical data
Active area90 ft² (8.4 m²)
Permeate flow rate2,900 GPD (11 m³/d)
Minimum salt rejection97%
Membrane typePolyamide Thin-Film Composite
General specifications of the HSRO-4040-FF element.

Dimensions

DimensionImperialMetric
Length (A)40.0 in1,016 mm
B DIA3.9 in99 mm
C DIA0.75 in19 mm
D1.05 in27 mm
Dimensions in inches (mm). 1 inch = 25.4 mm.

Operating limits for design

Maximum operating temperature113°F (45°C)
Maximum sanitization temperature (@ 25 psi)185°F (85°C)
Maximum operating pressure600 psi (41 bar)
Maximum pressure drop per element15 psi (1.0 bar)
Maximum pressure drop per pressure vessel60 psi (4.1 bar)
pH range (continuous operation)2–11
pH range (short-term cleaning, 30 min)1–12
Maximum feed silt density index (SDI)SDI 5
Free chlorine tolerance< 0.1 ppm

Important operation notes

  • For optimal performance, elements must be preconditioned by exposure to hot water before first use.
  • Keep elements moist at all times after initial wetting.
  • The maximum temperature for continuous operation above pH 10 is 95°F (35°C).
  • Oxidation damage caused by free chlorine or other oxidizing agents is not covered by the warranty; pretreatment to remove free chlorine is recommended.
  • Discard the permeate obtained during the first hour of operation.

Private label and custom versions

The DuPont™ FilmTec™ HSRO-4040-FF element is ideal for producing purified water in pharmaceutical, medical and biotechnology applications, as well as for permeate polishing in food and dairy processing. Contact our team for commercial inquiries, customization options and technical support.

Benötigen Sie diese Membran für Ihre Anlage?

Wir passen sie an Ihre Anlage an, versehen sie mit Ihrer Marke und begleiten Sie bei der Installation.

Angebot anfordern

Ähnliche Membranen

Adresse

Via Caduti sul Lavoro, 6
61032 Fano (PU), Italien