Via Caduti sul Lavoro, 6, 61032 Fano (PU), Italia +39 0721 1797741 info@ultramarwater.com
Hypershell-Dairy

Filmtec · Process

Hypershell-Dairy

DuPont™ FilmTec™ Hypershell™ Reverse Osmosis Elements for Dairy Applications DuPont™ FilmTec™ Hypershell™ reverse osmosis elements for dairy applications feature a full-fit configuration that minimizes stagnant areas for sanitary design. Thanks to a rigid, machined polypropylene outer shell, these elements do not deform, minimizing channeling and bypass compared to net-wrapped elements. Key specifications include advanced models […]

DuPont™ FilmTec™ Hypershell™ Reverse Osmosis Elements for Dairy Applications

DuPont™ FilmTec™ Hypershell™ reverse osmosis elements for dairy applications feature a full-fit configuration that minimizes stagnant areas for sanitary design. Thanks to a rigid, machined polypropylene outer shell, these elements do not deform, minimizing channeling and bypass compared to net-wrapped elements. Key specifications include advanced models such as the Hypershell™ XP RO-8038 element, which offers an active area of 385 ft² (35.8 m²) and a maximum operating pressure of 800 psi (54.8 bar).

Specifications

ProductPart numberActive areaFeed spacer thickness (mil)Max. recirculation crossflow, gpm (m³/h)Max. ΔP per element, psi (bar)
FilmTec™ Hypershell™ RO-8038302218370 ft² (34.4 m²)3380 (18.2)13 (0.9)
FilmTec™ Hypershell™ XP RO-803812119313385 ft² (35.8 m²)3380 (18.2)13 (0.9)
FilmTec™ Hypershell™ RO-8038/48360400290 ft² (27.0 m²)4880 (18.2)13 (0.9)
FilmTec™ Hypershell™ RO-390346364390 ft² (36.2 m²)2780 (18.2)13 (0.9)
FilmTec™ RO-3838/30-FF8058981 ft² (7.5 m²)3030 (6.8)15 (1.0)
FilmTec™ RO-3840/30-FF10866485 ft² (7.8 m²)3030 (6.8)15 (1.0)
Typical properties of FilmTec™ Hypershell™ elements for dairy applications.

Dimensions

DimensionHypershell™ RO-8038Hypershell™ RO-8038/48Hypershell™ RO-390RO-3838/30-FFRO-3840/30-FF
Length (A)38.00 in (965 mm)38.00 in (965 mm)40.00 in (1,016 mm)38.00 in (965 mm)38.75 in (984 mm)
B DIA7.9 in (200 mm)7.9 in (200 mm)7.9 in (200 mm)3.8 in (96 mm)3.8 in (96 mm)
C DIA1.125 in (28.58 mm)1.125 in (28.58 mm)1.125 in (28.58 mm)0.831 in (21.1 mm)0.831 in (21.1 mm)
Dimensions in inches (mm). 1 inch = 25.4 mm.

Operating limits for design

Maximum operating temperature122°F (50°C)
Maximum operating pressure800 psi (54.8 bar)
Maximum CIP pressure15–75 psi (1–5 bar)
pH range (continuous operation)2–11
pH range (short-term cleaning, 25°C)1.8–11 (at 122°F/50°C)
Hydrogen peroxide usage limit (continuous)20 ppm
Free chlorine toleranceNot detectable

Important operation notes

  • Keep elements moist at all times after initial wetting.
  • The maximum temperature for continuous operation above pH 10 is 95°F (35°C).
  • Oxidation damage is not covered by the warranty; DuPont recommends removing residual free chlorine by pretreatment.
  • Discard the permeate obtained during the first hour of operation.
  • Avoid static permeate-side backpressure at all times.

Private label and custom versions

DuPont™ FilmTec™ Hypershell™ elements are ideal for dewatering and concentration of milk, whey proteins and lactose, for concentration of process streams to reduce evaporator loads, and for polishing of RO/NF permeate and/or evaporator condensate. Contact our team for commercial inquiries, customization options and technical support.

Ti serve questa membrana nel tuo impianto?

Possiamo adattarla al tuo impianto, personalizzarla con il tuo marchio e seguirti nell'installazione.

Richiedi un preventivo

Membrane simili

Indirizzo

Via Caduti sul Lavoro, 6
61032 Fano (PU), Italia