Via Caduti sul Lavoro, 6, 61032 Fano (PU), Italia +39 0721 1797741 info@ultramarwater.com
HSRO-390-FF5

Filmtec · Process

HSRO-390-FF5

DuPont™ FilmTec™ HSRO-390-FF Hot Water Sanitizable Reverse Osmosis Element The DuPont™ FilmTec™ HSRO-390-FF hot water sanitizable reverse osmosis element delivers exceptional water quality with the ability to withstand hot water sanitization, eliminating the need for chemical disinfectants. It features a full-fit configuration that minimizes stagnant areas in sanitary applications. Key specifications include an active area […]

Diametro
8″
Formato
8040

DuPont™ FilmTec™ HSRO-390-FF Hot Water Sanitizable Reverse Osmosis Element

The DuPont™ FilmTec™ HSRO-390-FF hot water sanitizable reverse osmosis element delivers exceptional water quality with the ability to withstand hot water sanitization, eliminating the need for chemical disinfectants. It features a full-fit configuration that minimizes stagnant areas in sanitary applications. Key specifications include an active area of 390 ft² (36 m²), a permeate flow rate of 14,500 GPD (55 m³/d) and a minimum salt rejection of 97%.

Specifications

FeatureValue / Technical data
Part number170701
Active area390 ft² (36 m²)
Permeate flow rate14,500 GPD (55 m³/d)
Minimum salt rejection97%
Membrane typePolyamide Thin-Film Composite
General specifications of the HSRO-390-FF element.

Dimensions

DimensionImperialMetric
Length (A)40.0 in1,016 mm
B DIA7.9 in201 mm
C DIA (ID)1.125 in ID29 mm ID
Dimensions in inches (mm). 1 inch = 25.4 mm.

Operating limits for design

Maximum operating temperature113°F (45°C)
Maximum sanitization temperature (@ 25 psi)185°F (85°C)
Maximum operating pressure600 psi (41 bar)
Maximum pressure drop per element15 psi (1.0 bar)
Maximum pressure drop per pressure vessel60 psi (4.1 bar)
pH range (continuous operation)2–11
pH range (short-term cleaning, 30 min)1–12
Maximum feed silt density index (SDI)SDI 5
Free chlorine tolerance< 0.1 ppm

Important operation notes

  • For optimal performance, elements must be preconditioned by exposure to hot water before first use.
  • Keep elements moist at all times after initial wetting.
  • The maximum temperature for continuous operation above pH 10 is 95°F (35°C).
  • Oxidation damage caused by free chlorine or other oxidizing agents is not covered by the warranty; pretreatment to remove free chlorine is recommended.
  • Discard the permeate obtained during the first hour of operation.

Private label and custom versions

The DuPont™ FilmTec™ HSRO-390-FF element is ideal for producing purified water in pharmaceutical, medical and biotechnology applications, as well as for permeate polishing in food and dairy processing. Contact our team for commercial inquiries, customization options and technical support.

Ti serve questa membrana nel tuo impianto?

Possiamo adattarla al tuo impianto, personalizzarla con il tuo marchio e seguirti nell'installazione.

Richiedi un preventivo

Membrane simili

Indirizzo

Via Caduti sul Lavoro, 6
61032 Fano (PU), Italia