Filmtec · Process
HSRO-390-FF5
DuPont™ FilmTec™ HSRO-390-FF Hot Water Sanitizable Reverse Osmosis Element The DuPont™ FilmTec™ HSRO-390-FF hot water sanitizable reverse osmosis element delivers exceptional water quality with the ability to withstand hot water sanitization, eliminating the need for chemical disinfectants. It features a full-fit configuration that minimizes stagnant areas in sanitary applications. Key specifications include an active area […]
- Diameter
- 8″
- Format
- 8040
DuPont™ FilmTec™ HSRO-390-FF Hot Water Sanitizable Reverse Osmosis Element
The DuPont™ FilmTec™ HSRO-390-FF hot water sanitizable reverse osmosis element delivers exceptional water quality with the ability to withstand hot water sanitization, eliminating the need for chemical disinfectants. It features a full-fit configuration that minimizes stagnant areas in sanitary applications. Key specifications include an active area of 390 ft² (36 m²), a permeate flow rate of 14,500 GPD (55 m³/d) and a minimum salt rejection of 97%.
Specifications
| Feature | Value / Technical data |
|---|---|
| Part number | 170701 |
| Active area | 390 ft² (36 m²) |
| Permeate flow rate | 14,500 GPD (55 m³/d) |
| Minimum salt rejection | 97% |
| Membrane type | Polyamide Thin-Film Composite |
Dimensions
| Dimension | Imperial | Metric |
|---|---|---|
| Length (A) | 40.0 in | 1,016 mm |
| B DIA | 7.9 in | 201 mm |
| C DIA (ID) | 1.125 in ID | 29 mm ID |
Operating limits for design
| Maximum operating temperature | 113°F (45°C) |
| Maximum sanitization temperature (@ 25 psi) | 185°F (85°C) |
| Maximum operating pressure | 600 psi (41 bar) |
| Maximum pressure drop per element | 15 psi (1.0 bar) |
| Maximum pressure drop per pressure vessel | 60 psi (4.1 bar) |
| pH range (continuous operation) | 2–11 |
| pH range (short-term cleaning, 30 min) | 1–12 |
| Maximum feed silt density index (SDI) | SDI 5 |
| Free chlorine tolerance | < 0.1 ppm |
Important operation notes
- For optimal performance, elements must be preconditioned by exposure to hot water before first use.
- Keep elements moist at all times after initial wetting.
- The maximum temperature for continuous operation above pH 10 is 95°F (35°C).
- Oxidation damage caused by free chlorine or other oxidizing agents is not covered by the warranty; pretreatment to remove free chlorine is recommended.
- Discard the permeate obtained during the first hour of operation.
Private label and custom versions
The DuPont™ FilmTec™ HSRO-390-FF element is ideal for producing purified water in pharmaceutical, medical and biotechnology applications, as well as for permeate polishing in food and dairy processing. Contact our team for commercial inquiries, customization options and technical support.
Need this membrane in your system?
We can adapt it to your plant, label it with your brand and support you through installation.