Via Caduti sul Lavoro, 6, 61032 Fano (PU), Italien +39 0721 1797741 info@ultramarwater.com
Fortilife-XC80

Filmtec · Process

Fortilife-XC80

DuPont™ FilmTec™ Fortilife™ XC80 Reverse Osmosis Element The DuPont™ FilmTec™ Fortilife™ XC80 reverse osmosis element is designed to reach even higher brine concentrations, making it possible to achieve concentrate total dissolved solids (TDS) levels above 80,000 ppm. Its fouling-resistant membrane tolerates challenging feed waters and supports cleaning over a wide pH range (1–13), ensuring long […]

DuPont™ FilmTec™ Fortilife™ XC80 Reverse Osmosis Element

The DuPont™ FilmTec™ Fortilife™ XC80 reverse osmosis element is designed to reach even higher brine concentrations, making it possible to achieve concentrate total dissolved solids (TDS) levels above 80,000 ppm. Its fouling-resistant membrane tolerates challenging feed waters and supports cleaning over a wide pH range (1–13), ensuring long element life and cost-effective maintenance. Key specifications include an active area of 440 ft² (41 m²), a permeate flow rate of 9,050 GPD (34.2 m³/d) and a stabilized salt rejection of 99.47%.

Specifications

FeatureValue / Technical data
Active area440 ft² (41 m²)
Feed spacer thickness28 mil
Permeate flow rate9,050 GPD (34.2 m³/d)
Stabilized salt rejection99.47%
Minimum salt rejection99.25%
Membrane typePolyamide Thin-Film Composite
General specifications of the Fortilife™ XC80 element.

Dimensions

DimensionImperialMetric
Length (A)40.0 in1,016 mm
B DIA7.9 in201 mm
C DIA (ID)1.125 in ID29 mm ID
Dimensions in inches (mm). 1 inch = 25.4 mm.

Operating limits for design

Maximum operating temperature113°F (45°C)
Maximum operating pressure1,200 psi (83 bar)
Maximum pressure drop per element15 psi (1.0 bar)
Maximum pressure drop per pressure vessel (minimum 4 elements)50 psi (3.5 bar)
pH range (continuous operation)2–11
pH range (short-term cleaning, 30 min)1–13
Maximum feed silt density index (SDI)SDI 5
Free chlorine tolerance< 0.1 ppm

Important operation notes

  • Keep elements moist at all times after initial wetting.
  • The maximum temperature for continuous operation above pH 10 is 95°F (35°C).
  • Oxidation damage caused by free chlorine or other oxidizing agents is not covered by the warranty; removal of free chlorine by pretreatment is recommended.
  • Discard the permeate obtained during the first hour of operation.
  • Use of this product does not by itself guarantee the removal of cysts and pathogens from water.

Private label and custom versions

The DuPont™ FilmTec™ Fortilife™ XC80 element is ideal for industrial minimal and zero liquid discharge (MLD/ZLD) applications and for industrial wastewater recycling and reuse in the textile, steel and metals, chemical and petrochemical sectors. Contact our team for commercial inquiries, customization options and technical support.

Benötigen Sie diese Membran für Ihre Anlage?

Wir passen sie an Ihre Anlage an, versehen sie mit Ihrer Marke und begleiten Sie bei der Installation.

Angebot anfordern

Ähnliche Membranen

Adresse

Via Caduti sul Lavoro, 6
61032 Fano (PU), Italien