Filmtec · Process
Fortilife-XC80
DuPont™ FilmTec™ Fortilife™ XC80 Reverse Osmosis Element The DuPont™ FilmTec™ Fortilife™ XC80 reverse osmosis element is designed to reach even higher brine concentrations, making it possible to achieve concentrate total dissolved solids (TDS) levels above 80,000 ppm. Its fouling-resistant membrane tolerates challenging feed waters and supports cleaning over a wide pH range (1–13), ensuring long […]
DuPont™ FilmTec™ Fortilife™ XC80 Reverse Osmosis Element
The DuPont™ FilmTec™ Fortilife™ XC80 reverse osmosis element is designed to reach even higher brine concentrations, making it possible to achieve concentrate total dissolved solids (TDS) levels above 80,000 ppm. Its fouling-resistant membrane tolerates challenging feed waters and supports cleaning over a wide pH range (1–13), ensuring long element life and cost-effective maintenance. Key specifications include an active area of 440 ft² (41 m²), a permeate flow rate of 9,050 GPD (34.2 m³/d) and a stabilized salt rejection of 99.47%.
Specifications
| Feature | Value / Technical data |
|---|---|
| Active area | 440 ft² (41 m²) |
| Feed spacer thickness | 28 mil |
| Permeate flow rate | 9,050 GPD (34.2 m³/d) |
| Stabilized salt rejection | 99.47% |
| Minimum salt rejection | 99.25% |
| Membrane type | Polyamide Thin-Film Composite |
Dimensions
| Dimension | Imperial | Metric |
|---|---|---|
| Length (A) | 40.0 in | 1,016 mm |
| B DIA | 7.9 in | 201 mm |
| C DIA (ID) | 1.125 in ID | 29 mm ID |
Operating limits for design
| Maximum operating temperature | 113°F (45°C) |
| Maximum operating pressure | 1,200 psi (83 bar) |
| Maximum pressure drop per element | 15 psi (1.0 bar) |
| Maximum pressure drop per pressure vessel (minimum 4 elements) | 50 psi (3.5 bar) |
| pH range (continuous operation) | 2–11 |
| pH range (short-term cleaning, 30 min) | 1–13 |
| Maximum feed silt density index (SDI) | SDI 5 |
| Free chlorine tolerance | < 0.1 ppm |
Important operation notes
- Keep elements moist at all times after initial wetting.
- The maximum temperature for continuous operation above pH 10 is 95°F (35°C).
- Oxidation damage caused by free chlorine or other oxidizing agents is not covered by the warranty; removal of free chlorine by pretreatment is recommended.
- Discard the permeate obtained during the first hour of operation.
- Use of this product does not by itself guarantee the removal of cysts and pathogens from water.
Private label and custom versions
The DuPont™ FilmTec™ Fortilife™ XC80 element is ideal for industrial minimal and zero liquid discharge (MLD/ZLD) applications and for industrial wastewater recycling and reuse in the textile, steel and metals, chemical and petrochemical sectors. Contact our team for commercial inquiries, customization options and technical support.
Need this membrane in your system?
We can adapt it to your plant, label it with your brand and support you through installation.