Via Caduti sul Lavoro, 6, 61032 Fano (PU), Italy +39 0721 1797741 info@ultramarwater.com
Residential-ULTRAMAR-Water-RO-Elements-2012-400

Ultramar Water · Residential

Residential-ULTRAMAR-Water-RO-Elements-2012-400

UW-2012-400 residential reverse osmosis membrane The UW-2012-400 is a residential reverse osmosis membrane for drinking water, designed to deliver high reliability and consistent performance. Thanks to advanced technology and rigorous control of the rolling process, Ultramar Water elements ensure a high level of salt rejection with minimal reduction in water flux, and are certified by […]

Diameter
2″
Format
2012

UW-2012-400 residential reverse osmosis membrane

The UW-2012-400 is a residential reverse osmosis membrane for drinking water, designed to deliver high reliability and consistent performance. Thanks to advanced technology and rigorous control of the rolling process, Ultramar Water elements ensure a high level of salt rejection with minimal reduction in water flux, and are certified by NSF. Key operational data includes a water yield of 400 GPD and a stabilized salt rejection of 95%.

Specifications

ModelWater Yield (GPD)Stabilized Salt RejectionTest Conditions
UW-2012-40040095%25°C, 200 ppm NaCl solution, 80 psi and 30% recovery rate
Test conditions: 25°C (77°F), 200 ppm NaCl solution, 80 psi and 30% recovery rate. Permeate flow for a single element may vary ±15%.

Dimensions

ModelABCDE
UW-2012-40011.75 (298)0.87 (22)0.68 (17)1.87 (47.5)10.00 (254)
Dimensions in inches (mm). 1 inch = 25.4 mm. Home drinking water elements seal at a standard 2.0 in I.D. within pressure vessels.

Operating limits for design

Membrane TypePolyamide Thin-Film Composite
Maximum Operating Temperature45°C (113°F)
Maximum Operating Pressure300 psi (21 bar)
pH Range, Continuous Operation2–11
pH Range, Short-Term Cleaning (30 min)1–12
Maximum Feed Silt Density Index (SDI)5
Free Chlorine Tolerance< 0.1 ppm

Important operation notes

  • Discard the permeate produced during the first hour of use.
  • Keep elements moist at all times after initial wetting.
  • During prolonged shutdowns, store elements in a preservative solution to prevent biological growth, and rinse it out before use.
  • The OEM is fully responsible for the effects of incompatible chemicals and lubricants on the elements.
  • Failure to strictly follow the operating limits and guidelines voids the limited warranty.

Private label and custom versions

The UW-2012-400 is available under your brand. Contact our team for volumes, labeling and custom specifications.

Need this membrane in your system?

We can adapt it to your plant, label it with your brand and support you through installation.

Request a quote

Similar membranes

Address

Via Caduti sul Lavoro, 6
61032 Fano (PU), Italy

Telephone

+39 0721 1797741