Via Caduti sul Lavoro, 6, 61032 Fano (PU), Italy +39 0721 1797741 info@ultramarwater.com
Residential-1812-175-ULTRAMAR-WATER

Ultramar Water · Residential

Residential-1812-175-ULTRAMAR-WATER

UW-1812-175 residential reverse osmosis membrane The UW-1812-175 is a residential reverse osmosis membrane for drinking water, designed to deliver high reliability and consistent performance. Thanks to advanced technology and rigorous control of the rolling process, Ultramar Water elements ensure a high level of salt rejection with minimal reduction in water flux. Key operational data includes […]

Diameter
1.8″
Format
1812

UW-1812-175 residential reverse osmosis membrane

The UW-1812-175 is a residential reverse osmosis membrane for drinking water, designed to deliver high reliability and consistent performance. Thanks to advanced technology and rigorous control of the rolling process, Ultramar Water elements ensure a high level of salt rejection with minimal reduction in water flux. Key operational data includes a water yield of 175 GPD and a stabilized salt rejection of 97%.

Specifications

ModelWater Yield (GPD)Stabilized Salt RejectionTest Conditions
UW-1812-17517597%25°C, 250 ppm NaCl solution, 60 psi and 15% recovery rate
Test conditions: 25°C (77°F), 250 ppm NaCl solution, 60 psi and 15% recovery rate. Permeate flow for a single element may vary ±15%.

Dimensions

ModelABCDE
UW-1812-17511.75 (298)0.87 (22)0.68 (17)1.87 (47.5)10.00 (254)
Dimensions in inches (mm). 1 inch = 25.4 mm. Home drinking water elements seal at a standard 2.0 in I.D. within pressure vessels.

Operating limits for design

Membrane TypePolyamide Thin-Film Composite
Maximum Operating Temperature45°C (113°F)
Maximum Operating Pressure300 psi (21 bar)
pH Range, Continuous Operation2–11
pH Range, Short-Term Cleaning (30 min)1–12
Maximum Feed Silt Density Index (SDI)5
Free Chlorine Tolerance< 0.1 ppm

Important operation notes

  • Discard the permeate produced during the first hour of use.
  • Keep elements moist at all times after initial wetting.
  • During prolonged shutdowns, store elements in a preservative solution to prevent biological growth, and rinse it out before use.
  • The OEM is fully responsible for the effects of incompatible chemicals and lubricants on the elements.
  • Failure to strictly follow the operating limits and guidelines voids the limited warranty.

Private label and custom versions

The UW-1812-175 is available under your brand. Contact our team for volumes, labeling and custom specifications.

Need this membrane in your system?

We can adapt it to your plant, label it with your brand and support you through installation.

Request a quote

Similar membranes

Address

Via Caduti sul Lavoro, 6
61032 Fano (PU), Italy

Telephone

+39 0721 1797741