Via Caduti sul Lavoro, 6, 61032 Fano (PU), Italy +39 0721 1797741 info@ultramarwater.com
Residential RO Membrane Elements UW-1812 / UW-1810

Ultramar Water · Residential

Residential RO Membrane Elements UW-1812 / UW-1810

Reliable RO elements for household drinking water ULTRAMAR Water residential reverse osmosis elements are designed for under-sink and point-of-use drinking water systems. Advanced membrane technology and carefully controlled element rolling deliver stable, consistent performance over time, with a high level of salt rejection and minimal compromise on water flux. For OEMs and system builders, a […]

Diameter
1.8″
Format
1810, 1812

Reliable RO elements for household drinking water

ULTRAMAR Water residential reverse osmosis elements are designed for under-sink and point-of-use drinking water systems. Advanced membrane technology and carefully controlled element rolling deliver stable, consistent performance over time, with a high level of salt rejection and minimal compromise on water flux.

For OEMs and system builders, a dependable element means fewer service calls and a stronger brand reputation. All ULTRAMAR Water RO elements are certified by NSF (National Sanitation Foundation).

Specifications

ModelWater yield (GPD)Stabilized salt rejection (%)
UW-1812-242496
UW-1812-363696
UW-1812-505096
UW-1812-757596
UW-1812-10010096
UW-1810-363696
UW-1810-505096
Test conditions: 250 ppm NaCl solution, 60 psi, 25 °C, 15% recovery. Permeate flow of a single element may vary by ±15%.

Dimensions

ModelA – overall lengthBCD – diameterE – membrane length
UW-181211.75 in (298 mm)0.87 in (22 mm)0.68 in (17 mm)1.75 in (44.5 mm)10.00 in (254 mm)
UW-181010.07 in (256 mm)0.87 in (22 mm)0.68 in (17 mm)1.75 in (44.5 mm)9.05 in (230 mm)
Home drinking water elements seal at a standard 2.0 in I.D. within the pressure vessel.

Operating limits for design

Membrane typePolyamide thin-film composite
Maximum operating temperature45 °C (113 °F)
Maximum operating pressure21 bar (300 psi)
pH range, continuous operation2 – 11
pH range, short-term cleaning (30 min)1 – 12
Maximum feed SDI5
Free chlorine tolerance< 0.1 ppm

Important operation notes

  • Discard the permeate produced during the first hour of use.
  • Keep elements moist at all times after initial wetting.
  • During prolonged shutdowns, store elements in a preservative solution to prevent biological growth, and rinse it out before use.
  • The OEM is responsible for the effects of incompatible chemicals and lubricants on the elements.
  • Failure to follow these operating limits voids the limited warranty.

Private label and custom versions

All residential models are available under your brand. Contact our team for volumes, labeling and custom specifications.

Need this membrane in your system?

We can adapt it to your plant, label it with your brand and support you through installation.

Request a quote

Similar membranes

Address

Via Caduti sul Lavoro, 6
61032 Fano (PU), Italy

Telephone

+39 0721 1797741