Ultramar Water · Residential
Residential RO Membrane Elements UW-1812 / UW-1810
Reliable RO elements for household drinking water ULTRAMAR Water residential reverse osmosis elements are designed for under-sink and point-of-use drinking water systems. Advanced membrane technology and carefully controlled element rolling deliver stable, consistent performance over time, with a high level of salt rejection and minimal compromise on water flux. For OEMs and system builders, a […]
- Durchmesser
- 1,8″
- Format
- 1810, 1812
Reliable RO elements for household drinking water
ULTRAMAR Water residential reverse osmosis elements are designed for under-sink and point-of-use drinking water systems. Advanced membrane technology and carefully controlled element rolling deliver stable, consistent performance over time, with a high level of salt rejection and minimal compromise on water flux.
For OEMs and system builders, a dependable element means fewer service calls and a stronger brand reputation. All ULTRAMAR Water RO elements are certified by NSF (National Sanitation Foundation).
Specifications
| Model | Water yield (GPD) | Stabilized salt rejection (%) |
|---|---|---|
| UW-1812-24 | 24 | 96 |
| UW-1812-36 | 36 | 96 |
| UW-1812-50 | 50 | 96 |
| UW-1812-75 | 75 | 96 |
| UW-1812-100 | 100 | 96 |
| UW-1810-36 | 36 | 96 |
| UW-1810-50 | 50 | 96 |
Dimensions
| Model | A – overall length | B | C | D – diameter | E – membrane length |
|---|---|---|---|---|---|
| UW-1812 | 11.75 in (298 mm) | 0.87 in (22 mm) | 0.68 in (17 mm) | 1.75 in (44.5 mm) | 10.00 in (254 mm) |
| UW-1810 | 10.07 in (256 mm) | 0.87 in (22 mm) | 0.68 in (17 mm) | 1.75 in (44.5 mm) | 9.05 in (230 mm) |
Operating limits for design
| Membrane type | Polyamide thin-film composite |
| Maximum operating temperature | 45 °C (113 °F) |
| Maximum operating pressure | 21 bar (300 psi) |
| pH range, continuous operation | 2 – 11 |
| pH range, short-term cleaning (30 min) | 1 – 12 |
| Maximum feed SDI | 5 |
| Free chlorine tolerance | < 0.1 ppm |
Important operation notes
- Discard the permeate produced during the first hour of use.
- Keep elements moist at all times after initial wetting.
- During prolonged shutdowns, store elements in a preservative solution to prevent biological growth, and rinse it out before use.
- The OEM is responsible for the effects of incompatible chemicals and lubricants on the elements.
- Failure to follow these operating limits voids the limited warranty.
Private label and custom versions
All residential models are available under your brand. Contact our team for volumes, labeling and custom specifications.
Benötigen Sie diese Membran für Ihre Anlage?
Wir passen sie an Ihre Anlage an, versehen sie mit Ihrer Marke und begleiten Sie bei der Installation.
Ähnliche Membranen