Ultramar Water · Sea Water
SW-8040-HF(34)ULTRAMAR-WATER
SW-8040-HF Sea Water RO Membrane for High-Pressure Desalination The SW-8040-HF sea water RO membrane is an 8-inch spiral-wound element designed for high-pressure seawater treatment. It combines a stated active membrane area of 400 ft² (37 m²) with a stabilized salt rejection of 99.7%, making it a candidate for seawater reverse osmosis systems where productivity and […]
- Diameter
- 8″
- Format
- 8040
SW-8040-HF Sea Water RO Membrane for High-Pressure Desalination
The SW-8040-HF sea water RO membrane is an 8-inch spiral-wound element designed for high-pressure seawater treatment. It combines a stated active membrane area of 400 ft² (37 m²) with a stabilized salt rejection of 99.7%, making it a candidate for seawater reverse osmosis systems where productivity and salt rejection are key design parameters.
Ultramar Water supplies membrane elements for water-treatment professionals, including system builders, OEMs and industrial water-treatment specialists. The SW-8040-HF can be assessed for seawater treatment projects according to the required permeate flow, feed-water conditions and operating limits. Consult the specifications below when evaluating its suitability for your application.
Specifications
| Model | Permeate Flow GPD (m³/day) | Active Membrane Area ft² (m²) | Stabilized Salt Rejection | Minimum Salt Rejection | Feed Spacer mil (mm) | Test Conditions |
|---|---|---|---|---|---|---|
| SW-8040-HF | 8,200 (31) | 400 (37) | 99.7% | 99.6% | 28 (0.7) | 800 psi / 32,800 ppm NaCl |
Dimensions
| Model | A | B | C |
|---|---|---|---|
| SW-8040-HF | 40.0 (1016) | 1.125 (29) | 7.9 (201) |
Operating limits for design
| Maximum Operating Temperature | 45°C (113°F) |
| Maximum Operating Pressure | 1200 psi (83 bar) |
| Maximum Pressure Drop (single element) | 15 psi (1.0 bar) |
| pH Range for Continuous Operation | 2–11 |
| pH Range for Cleaning | 1.2–12 |
| Chlorine Tolerance | < 0.1 ppm |
| Maximum Feed SDI | 5 |
Important operation notes
- Discard the permeate produced during the first hour of use.
- Keep elements moist at all times after initial wetting.
- During prolonged shutdowns, store elements in a preservative solution to prevent biological growth, and rinse it out before use.
- The OEM is responsible for the effects of incompatible chemicals and lubricants on the elements.
- Failure to follow these operating limits voids the limited warranty.
Private label and custom versions
For OEM projects and specific water-treatment requirements, contact Ultramar Water to discuss your application and product requirements. To inquire about private label supply or customized solutions, contact our team.
Need this membrane in your system?
We can adapt it to your plant, label it with your brand and support you through installation.
Similar membranes