Via Caduti sul Lavoro, 6, 61032 Fano (PU), Italy +39 0721 1797741 info@ultramarwater.com
SW-2540 ULTRAMAR WATER

Ultramar Water · Sea Water

SW-2540 ULTRAMAR WATER

SW-2540 Sea Water RO Membrane The SW-2540 sea water RO membrane is designed for high-pressure seawater treatment applications where high salt rejection and productivity are required. With a permeate flow of 650 GPD (2.5 m³/day) and a stabilized salt rejection of 99.6%, this membrane element is intended for system builders, OEMs and technical service centers […]

Diameter
2.5″
Format
2540

SW-2540 Sea Water RO Membrane

The SW-2540 sea water RO membrane is designed for high-pressure seawater treatment applications where high salt rejection and productivity are required. With a permeate flow of 650 GPD (2.5 m³/day) and a stabilized salt rejection of 99.6%, this membrane element is intended for system builders, OEMs and technical service centers working with seawater reverse osmosis systems.

Ultramar Water supplies membrane elements for seawater treatment applications, supporting customers looking for components suited to their system design and operating requirements. The SW-2540 is a solution to consider when selecting membrane elements for high-pressure seawater treatment systems.

Specifications

ModelPermeate Flow GPD (m³/day)Active Membrane Area ft² (m²)Stabilized Salt RejectionFeed Spacer mil (mm)Test Conditions
SW-2540650 (2.5)27 (2.5)99.6%28 (0.7)800 psi / 32,800 ppm NaCl
All performance data are collected at 25°C (77°F), pH 7.5 and 8% recovery rate. Permeate flow for a single element may vary ±15%.

Dimensions

ModelOverall lengthFeed-side dimensionEnd dimension (left)End dimension (right)Product-side dimension
SW-254040.0 (1016)0.75 (19)1.05 (26.7)1.05 (26.7)2.4 (61)
Dimensions in inches (mm). 1 inch = 25.4 mm. Dimension labels are interpreted from the drawing.

Operating limits for design

Maximum Operating Temperature45°C (113°F)
Maximum Operating Pressure1200 psi (83 bar)
Maximum Pressure Drop (single element)15 psi (1.0 bar)
pH Range for Continuous Operation2–11
pH Range for Cleaning1.2–12
Chlorine Tolerance< 0.1 ppm
Maximum Feed SDI5

Important operation notes

  • Discard the permeate produced during the first hour of use.
  • Keep elements moist at all times after initial wetting.
  • During prolonged shutdowns, store elements in a preservative solution to prevent biological growth, and rinse it out before use.
  • The OEM is responsible for the effects of incompatible chemicals and lubricants on the elements.
  • Failure to follow the operating limits and guidelines given in the product documentation may affect the limited warranty.

Private label and custom versions

The SW-2540 sea water RO membrane may be considered for private label supply and customized requirements. Contact our team to discuss volumes, labeling and custom specifications.

Need this membrane in your system?

We can adapt it to your plant, label it with your brand and support you through installation.

Request a quote

Similar membranes

Address

Via Caduti sul Lavoro, 6
61032 Fano (PU), Italy

Telephone

+39 0721 1797741