Ultramar Water · Ultra Low Pressure
ULP-2521-ULTRAMAR-WATER
ULP-2521 Brackish Water RO Membrane for Low-Pressure Applications The ULP-2521 brackish water RO membrane is a 2.5-inch spiral-wound element designed for low or ultra-low pressure brackish water treatment. It combines a stated permeate flow of 318 GPD (1.2 m³/day), an active membrane area of 11 ft² (1 m²) and a stabilized salt rejection of 99.2%, […]
- Diametro
- 2,5″
- Formato
- 2521
ULP-2521 Brackish Water RO Membrane for Low-Pressure Applications
The ULP-2521 brackish water RO membrane is a 2.5-inch spiral-wound element designed for low or ultra-low pressure brackish water treatment. It combines a stated permeate flow of 318 GPD (1.2 m³/day), an active membrane area of 11 ft² (1 m²) and a stabilized salt rejection of 99.2%, according to the technical datasheet.
Ultramar Water supplies membrane elements for water-treatment professionals, including system builders, OEMs and industrial water-treatment specialists. The ULP-2521 can be evaluated for brackish water reverse osmosis systems where low-pressure operation and productivity are important design considerations. Review the technical specifications and operating limits below when assessing its suitability for your application.
Specifications
| Model | Permeate Flow GPD (m³/day) | Active Membrane Area ft² (m²) | Stabilized Salt Rejection | Feed Spacer mil (mm) | Test Conditions |
|---|---|---|---|---|---|
| ULP-2521 | 318 (1.2) | 11 (1) | 99.2% | 28 (0.7) | 150 psi / 2,000 ppm NaCl |
Dimensions
The dimensional drawing in the supplied datasheet does not provide clearly readable numerical measurements for the ULP-2521 model.
Dimensions in inches (mm). 1 inch = 25.4 mm.
Operating limits for design
| Maximum Operating Temperature | 45°C (113°F) |
| Maximum Operating Pressure | 600 psi (41 bar) |
| Maximum Pressure Drop (single element) | 15 psi (1.0 bar) |
| pH Range for Continuous Operation | 2–11 |
| pH Range for Cleaning | 2–12 |
| Chlorine Tolerance | < 0.1 ppm |
| Maximum Feed SDI | 5 |
Important operation notes
- Discard the permeate produced during the first hour of use.
- Keep elements moist at all times after initial wetting.
- During prolonged shutdowns, store elements in a preservative solution to prevent biological growth, and rinse it out before use.
- The OEM is responsible for the effects of incompatible chemicals and lubricants on the elements.
- Failure to follow these operating limits voids the limited warranty.
Private label and custom versions
For OEM projects and specific water-treatment requirements, contact Ultramar Water to discuss your application and product requirements. To inquire about private label supply or customized solutions, contact our team.
Ti serve questa membrana nel tuo impianto?
Possiamo adattarla al tuo impianto, personalizzarla con il tuo marchio e seguirti nell'installazione.
Membrane simili