Via Caduti sul Lavoro, 6, 61032 Fano (PU), Italia +39 0721 1797741 info@ultramarwater.com
ULP-4021-ULTRAMAR-WATER

Ultramar Water · Ultra Low Pressure

ULP-4021-ULTRAMAR-WATER

ULP-4021 Membrane for Brackish Water Treatment The ULP-4021 membrane is a spiral wound element designed for brackish water treatment. Described as a low-pressure, high-productivity solution, it is intended for applications requiring low or ultra-low pressure operation. According to the supplied datasheet, the ULP-4021 delivers a permeate flow of 1,050 GPD (4.0 m³/day), an active membrane […]

Diametro
4″
Formato
4021

ULP-4021 Membrane for Brackish Water Treatment

The ULP-4021 membrane is a spiral wound element designed for brackish water treatment. Described as a low-pressure, high-productivity solution, it is intended for applications requiring low or ultra-low pressure operation.

According to the supplied datasheet, the ULP-4021 delivers a permeate flow of 1,050 GPD (4.0 m³/day), an active membrane area of 36 ft² (3.3 m²), a stabilized salt rejection of 99.2% and a minimum salt rejection of 99.0%. These specifications can help OEMs, water treatment system builders and technical professionals assess its suitability for their brackish water treatment applications.

Specifications

ModelPermeate Flow GPD (m³/day)Active Membrane Area ft² (m²)Stabilized Salt RejectionMinimum Salt RejectionFeed Spacer mil (mm)Test Conditions
ULP-40211,050 (4.0)36 (3.3)99.2%99.0%28 (0.7)150 psi / 2,000 ppm NaCl
All performance data are collected at 25°C (77°F), pH 7.5 and 15% recovery rate. Permeate flow for a single element may vary ±15%.

Dimensions

DimensionMeasurement
Element dimensionsNot specified in the supplied datasheet.
Dimensions in inches (mm). 1 inch = 25.4 mm.

Operating limits for design

Maximum Operating Temperature45°C (113°F)
Maximum Operating Pressure600 psi (41 bar)
Maximum Pressure Drop (single element)15 psi (1.0 bar)
pH Range for Continuous Operation2–11
pH Range for Cleaning2–12
Chlorine Tolerance< 0.1 ppm
Maximum Feed SDI5

Important operation notes

  • Discard the permeate produced during the first hour of use.
  • Keep elements moist at all times after initial wetting.
  • During prolonged shutdowns, store elements in a preservative solution to prevent biological growth, and rinse it out before use.
  • The OEM is responsible for the effects of incompatible chemicals and lubricants on the elements.
  • Failure to follow these operating limits voids the limited warranty.

Private label and custom versions

If you are sourcing membrane elements for water treatment systems or OEM projects, contact Ultramar Water to discuss your application requirements and explore the available supply and customization options.

Contact Ultramar Water to discuss your requirements with our team.

Ti serve questa membrana nel tuo impianto?

Possiamo adattarla al tuo impianto, personalizzarla con il tuo marchio e seguirti nell'installazione.

Richiedi un preventivo

Membrane simili

Indirizzo

Via Caduti sul Lavoro, 6
61032 Fano (PU), Italia