Via Caduti sul Lavoro, 6, 61032 Fano (PU), Italy +39 0721 1797741 info@ultramarwater.com
ULP-2521-ULTRAMAR-WATER

Ultramar Water · Ultra Low Pressure

ULP-2521-ULTRAMAR-WATER

ULP-2521 Brackish Water RO Membrane for Low-Pressure Applications The ULP-2521 brackish water RO membrane is a 2.5-inch spiral-wound element designed for low or ultra-low pressure brackish water treatment. It combines a stated permeate flow of 318 GPD (1.2 m³/day), an active membrane area of 11 ft² (1 m²) and a stabilized salt rejection of 99.2%, […]

Diameter
2.5″
Format
2521

ULP-2521 Brackish Water RO Membrane for Low-Pressure Applications

The ULP-2521 brackish water RO membrane is a 2.5-inch spiral-wound element designed for low or ultra-low pressure brackish water treatment. It combines a stated permeate flow of 318 GPD (1.2 m³/day), an active membrane area of 11 ft² (1 m²) and a stabilized salt rejection of 99.2%, according to the technical datasheet.

Ultramar Water supplies membrane elements for water-treatment professionals, including system builders, OEMs and industrial water-treatment specialists. The ULP-2521 can be evaluated for brackish water reverse osmosis systems where low-pressure operation and productivity are important design considerations. Review the technical specifications and operating limits below when assessing its suitability for your application.

Specifications

ModelPermeate Flow GPD (m³/day)Active Membrane Area ft² (m²)Stabilized Salt RejectionFeed Spacer mil (mm)Test Conditions
ULP-2521318 (1.2)11 (1)99.2%28 (0.7)150 psi / 2,000 ppm NaCl
All performance data are collected at 25°C (77°F), pH 7.5 and 15% recovery rate. Permeate flow for a single element may vary ±15%.

Dimensions

The dimensional drawing in the supplied datasheet does not provide clearly readable numerical measurements for the ULP-2521 model.

Dimensions in inches (mm). 1 inch = 25.4 mm.

Operating limits for design

Maximum Operating Temperature45°C (113°F)
Maximum Operating Pressure600 psi (41 bar)
Maximum Pressure Drop (single element)15 psi (1.0 bar)
pH Range for Continuous Operation2–11
pH Range for Cleaning2–12
Chlorine Tolerance< 0.1 ppm
Maximum Feed SDI5

Important operation notes

  • Discard the permeate produced during the first hour of use.
  • Keep elements moist at all times after initial wetting.
  • During prolonged shutdowns, store elements in a preservative solution to prevent biological growth, and rinse it out before use.
  • The OEM is responsible for the effects of incompatible chemicals and lubricants on the elements.
  • Failure to follow these operating limits voids the limited warranty.

Private label and custom versions

For OEM projects and specific water-treatment requirements, contact Ultramar Water to discuss your application and product requirements. To inquire about private label supply or customized solutions, contact our team.

Need this membrane in your system?

We can adapt it to your plant, label it with your brand and support you through installation.

Request a quote

Similar membranes

Address

Via Caduti sul Lavoro, 6
61032 Fano (PU), Italy

Telephone

+39 0721 1797741