Ultramar Water · Sea Water
SW-8040-440-HR-ULTRAMAR-WATER
SW-8040-440-HR Sea Water RO Membrane for High-Pressure Desalination The SW-8040-440-HR sea water RO membrane is a spiral-wound element designed for high-pressure seawater treatment, combining high salt rejection with high productivity. It features an active membrane area of 440 ft² (41 m²), a stabilized salt rejection of 99.8% and a minimum salt rejection of 99.7%, according […]
- Diametro
- 8″
- Formato
- 8040
SW-8040-440-HR Sea Water RO Membrane for High-Pressure Desalination
The SW-8040-440-HR sea water RO membrane is a spiral-wound element designed for high-pressure seawater treatment, combining high salt rejection with high productivity. It features an active membrane area of 440 ft² (41 m²), a stabilized salt rejection of 99.8% and a minimum salt rejection of 99.7%, according to the supplied technical datasheet.
Ultramar Water supplies membrane elements for water-treatment professionals, including system builders, OEMs and industrial water-treatment specialists. The SW-8040-440-HR can be considered for seawater reverse osmosis projects where productivity and salt rejection are important design parameters. Check the specifications and operating limits below when assessing the membrane for your application.
Specifications
| Model | Permeate Flow GPD (m³/day) | Active Membrane Area ft² (m²) | Stabilized Salt Rejection | Minimum Salt Rejection | Feed Spacer mil (mm) | Test Conditions |
|---|---|---|---|---|---|---|
| SW-8040-440-HR | 6,700 (25) | 440 (41) | 99.8% | 99.7% | 28 (0.7) | 800 psi / 32,800 ppm NaCl |
Dimensions
| Model | A | B | C |
|---|---|---|---|
| SW-8040-440-HR | 40.0 (1016) | 1.125 (29) | 7.9 (201) |
Operating limits for design
| Maximum Operating Temperature | 45°C (113°F) |
| Maximum Operating Pressure | 1200 psi (83 bar) |
| Maximum Pressure Drop (single element) | 15 psi (1.0 bar) |
| pH Range for Continuous Operation | 2–11 |
| pH Range for Cleaning | 1.2–12 |
| Chlorine Tolerance | < 0.1 ppm |
| Maximum Feed SDI | 5 |
Important operation notes
- Discard the permeate produced during the first hour of use.
- Keep elements moist at all times after initial wetting.
- During prolonged shutdowns, store elements in a preservative solution to prevent biological growth, and rinse it out before use.
- The OEM is responsible for the effects of incompatible chemicals and lubricants on the elements.
- Failure to follow these operating limits voids the limited warranty.
Private label and custom versions
For OEM projects and specific water-treatment requirements, contact Ultramar Water to discuss your application and product requirements. To inquire about private label supply or customized solutions, contact our team.
Ti serve questa membrana nel tuo impianto?
Possiamo adattarla al tuo impianto, personalizzarla con il tuo marchio e seguirti nell'installazione.
Membrane simili