Via Caduti sul Lavoro, 6, 61032 Fano (PU), Italien +39 0721 1797741 info@ultramarwater.com
SW-8040-440-HR-ULTRAMAR-WATER

Ultramar Water · Sea Water

SW-8040-440-HR-ULTRAMAR-WATER

SW-8040-440-HR Sea Water RO Membrane for High-Pressure Desalination The SW-8040-440-HR sea water RO membrane is a spiral-wound element designed for high-pressure seawater treatment, combining high salt rejection with high productivity. It features an active membrane area of 440 ft² (41 m²), a stabilized salt rejection of 99.8% and a minimum salt rejection of 99.7%, according […]

Durchmesser
8″
Format
8040

SW-8040-440-HR Sea Water RO Membrane for High-Pressure Desalination

The SW-8040-440-HR sea water RO membrane is a spiral-wound element designed for high-pressure seawater treatment, combining high salt rejection with high productivity. It features an active membrane area of 440 ft² (41 m²), a stabilized salt rejection of 99.8% and a minimum salt rejection of 99.7%, according to the supplied technical datasheet.

Ultramar Water supplies membrane elements for water-treatment professionals, including system builders, OEMs and industrial water-treatment specialists. The SW-8040-440-HR can be considered for seawater reverse osmosis projects where productivity and salt rejection are important design parameters. Check the specifications and operating limits below when assessing the membrane for your application.

Specifications

ModelPermeate Flow GPD (m³/day)Active Membrane Area ft² (m²)Stabilized Salt RejectionMinimum Salt RejectionFeed Spacer mil (mm)Test Conditions
SW-8040-440-HR6,700 (25)440 (41)99.8%99.7%28 (0.7)800 psi / 32,800 ppm NaCl
All performance data are collected at 25°C (77°F), pH 7.5 and 8% recovery rate. Permeate flow for a single element may vary ±15%.

Dimensions

ModelABC
SW-8040-440-HR40.0 (1016)1.125 (29)7.9 (201)
Dimensions in inches (mm). 1 inch = 25.4 mm.

Operating limits for design

Maximum Operating Temperature45°C (113°F)
Maximum Operating Pressure1200 psi (83 bar)
Maximum Pressure Drop (single element)15 psi (1.0 bar)
pH Range for Continuous Operation2–11
pH Range for Cleaning1.2–12
Chlorine Tolerance< 0.1 ppm
Maximum Feed SDI5

Important operation notes

  • Discard the permeate produced during the first hour of use.
  • Keep elements moist at all times after initial wetting.
  • During prolonged shutdowns, store elements in a preservative solution to prevent biological growth, and rinse it out before use.
  • The OEM is responsible for the effects of incompatible chemicals and lubricants on the elements.
  • Failure to follow these operating limits voids the limited warranty.

Private label and custom versions

For OEM projects and specific water-treatment requirements, contact Ultramar Water to discuss your application and product requirements. To inquire about private label supply or customized solutions, contact our team.

Benötigen Sie diese Membran für Ihre Anlage?

Wir passen sie an Ihre Anlage an, versehen sie mit Ihrer Marke und begleiten Sie bei der Installation.

Angebot anfordern

Ähnliche Membranen

Adresse

Via Caduti sul Lavoro, 6
61032 Fano (PU), Italien