Via Caduti sul Lavoro, 6, 61032 Fano (PU), Italia +39 0721 1797741 info@ultramarwater.com
SW-4040-ULTRAMAR-WATER

Ultramar Water · Sea Water

SW-4040-ULTRAMAR-WATER

SW-4040 Sea Water RO Membrane The SW-4040 sea water RO membrane is designed for high-pressure seawater treatment applications requiring high salt rejection and productivity. It features a permeate flow of 1,700 GPD (7.2 m³/day), a stabilized salt rejection of 99.7% and a minimum salt rejection of 99.5%. This membrane element is intended for OEMs, seawater […]

Diametro
4″
Formato
4040

SW-4040 Sea Water RO Membrane

The SW-4040 sea water RO membrane is designed for high-pressure seawater treatment applications requiring high salt rejection and productivity. It features a permeate flow of 1,700 GPD (7.2 m³/day), a stabilized salt rejection of 99.7% and a minimum salt rejection of 99.5%. This membrane element is intended for OEMs, seawater treatment system builders and technical service centers looking for components for seawater reverse osmosis systems.

Ultramar Water supplies membrane elements for seawater treatment applications, supporting system builders and industrial water treatment professionals in selecting components according to their system design and operating requirements. The SW-4040 is a solution to consider for high-pressure seawater treatment systems where salt rejection and membrane productivity are key selection criteria.

Specifications

ModelPermeate Flow GPD (m³/day)Active Membrane Area ft² (m²)Stabilized Salt RejectionMinimum Salt RejectionFeed Spacer mil (mm)Test Conditions
SW-40401,700 (7.2)90 (8.4)99.7%99.5%28 (0.7)800 psi / 32,000 ppm NaCl
All performance data are collected at 25°C (77°F), pH 7.5 and 8% recovery rate. Permeate flow for a single element may vary ±15%.

Dimensions

ModelA – overall lengthBCD
SW-404040.0 (1016)1.05 (26.7)0.75 (19)3.9 (99)
Dimensions in inches (mm). 1 inch = 25.4 mm. Dimensions B, C and D are identified by their letters as shown in the original drawing.

Operating limits for design

Maximum Operating Temperature45°C (113°F)
Maximum Operating Pressure1200 psi (83 bar)
Maximum Pressure Drop (single element)15 psi (1.0 bar)
pH Range for Continuous Operation2–11
pH Range for Cleaning1.2–12
Chlorine Tolerance< 0.1 ppm
Maximum Feed SDI5

Important operation notes

  • Discard the permeate produced during the first hour of use.
  • Keep elements moist at all times after initial wetting.
  • During prolonged shutdowns, store elements in a preservative solution to prevent biological growth, and rinse it out before use.
  • The OEM is responsible for the effects of incompatible chemicals and lubricants on the elements.
  • Failure to follow the applicable operating limits and guidelines may affect the product warranty.

Private label and custom versions

The SW-4040 sea water RO membrane can be evaluated for private label supply and customized requirements. Contact our team to discuss volumes, labeling and custom specifications.

Ti serve questa membrana nel tuo impianto?

Possiamo adattarla al tuo impianto, personalizzarla con il tuo marchio e seguirti nell'installazione.

Richiedi un preventivo

Membrane simili

Indirizzo

Via Caduti sul Lavoro, 6
61032 Fano (PU), Italia