Via Caduti sul Lavoro, 6, 61032 Fano (PU), Italia +39 0721 1797741 info@ultramarwater.com
XLE PRO-4040 & XLE PRO-2540

Filmtec · Extra Low Energy

XLE PRO-4040 & XLE PRO-2540

DuPont™ FilmTec™ XLE PRO-4040 & XLE PRO-2540 Reverse Osmosis Elements DuPont™ FilmTec™ XLE PRO-4040 and XLE PRO-2540 reverse osmosis elements are large commercial tape-wrapped modules designed for ultra-low pressure applications, reducing energy consumption and delivering higher productivity, especially in cold water. Key specifications include permeate flow rates of 2,750 GPD (10.4 m³/d) for the 4040 […]

Diametro
2,5″ · 4″
Formato
2540, 4040

DuPont™ FilmTec™ XLE PRO-4040 & XLE PRO-2540 Reverse Osmosis Elements

DuPont™ FilmTec™ XLE PRO-4040 and XLE PRO-2540 reverse osmosis elements are large commercial tape-wrapped modules designed for ultra-low pressure applications, reducing energy consumption and delivering higher productivity, especially in cold water. Key specifications include permeate flow rates of 2,750 GPD (10.4 m³/d) for the 4040 model and 1,000 GPD (3.8 m³/d) for the 2540 model, with a stabilized salt rejection of 99.0%.

Specifications

FeatureXLE PRO-4040XLE PRO-2540
Part number1208299512082909
Active area85 ft² (7.9 m²)28 ft² (2.6 m²)
Permeate flow rate2,750 GPD (10.4 m³/d)1,000 GPD (3.8 m³/d)
Stabilized salt rejection99.0%99.0%
Minimum salt rejection97.0%97.0%
Membrane typePolyamide Thin-Film Composite
General specifications of the XLE PRO series (4040 and 2540).

Dimensions

DimensionXLE PRO-4040XLE PRO-2540
Length (A)40.0 in (1,016 mm)40.0 in (1,016 mm)
Diameter (B)3.9 in (99 mm)2.4 in (61 mm)
Permeate tube outer diameter (C)0.75 in OD (19 mm)0.75 in OD (19 mm)
D1.05 in (27 mm)1.19 in (30.2 mm)
Dimensions in inches (mm). 1 inch = 25.4 mm. The 4040 model fits 4-inch pressure vessels; the 2540 model fits 2.5-inch pressure vessels.

Operating limits for design

Maximum operating temperature113°F (45°C)
Maximum operating pressure600 psi (41 bar)
Maximum pressure drop per element13 psi (0.9 bar)
Maximum pressure drop per pressure vessel (maximum 2 elements)30 psi (2.1 bar)
pH range (continuous operation)2–11
pH range (short-term cleaning, 30 min)1–13
Maximum feed flow rate (4040 / 2540)14 gpm (3.2 m³/h) / 6 gpm (1.4 m³/h)
Maximum feed silt density index (SDI)SDI 5
Free chlorine tolerance< 0.1 ppm

Important operation notes

  • Keep elements moist at all times after initial wetting.
  • The maximum temperature for continuous operation above pH 10 is 95°F (35°C).
  • Oxidation damage caused by free chlorine or other oxidizing agents is not covered by the warranty; pretreatment to remove free chlorine is recommended.
  • Discard the permeate obtained during the first hour of operation.
  • Use of this product does not by itself guarantee the removal of cysts and pathogens from water.

Private label and custom versions

DuPont™ FilmTec™ XLE PRO-4040 and XLE PRO-2540 elements are ideal for drinking water and commercial applications in systems up to 2.3 m³/h (10 gpm), such as hotels, restaurants, cafés, car washes, schools and refill stations. Contact our team for commercial inquiries, customization options and technical support.

Ti serve questa membrana nel tuo impianto?

Possiamo adattarla al tuo impianto, personalizzarla con il tuo marchio e seguirti nell'installazione.

Richiedi un preventivo

Membrane simili

Extra Low Energy

XLE-2521

2,5″ (2521)

Extra Low Energy

XLE-440

8″ (8040)

Indirizzo

Via Caduti sul Lavoro, 6
61032 Fano (PU), Italia