Filmtec · Extra Low Energy
XLE PRO-4040 & XLE PRO-2540
DuPont™ FilmTec™ XLE PRO-4040 & XLE PRO-2540 Reverse Osmosis Elements DuPont™ FilmTec™ XLE PRO-4040 and XLE PRO-2540 reverse osmosis elements are large commercial tape-wrapped modules designed for ultra-low pressure applications, reducing energy consumption and delivering higher productivity, especially in cold water. Key specifications include permeate flow rates of 2,750 GPD (10.4 m³/d) for the 4040 […]
- Durchmesser
- 2,5″ · 4″
- Format
- 2540, 4040
DuPont™ FilmTec™ XLE PRO-4040 & XLE PRO-2540 Reverse Osmosis Elements
DuPont™ FilmTec™ XLE PRO-4040 and XLE PRO-2540 reverse osmosis elements are large commercial tape-wrapped modules designed for ultra-low pressure applications, reducing energy consumption and delivering higher productivity, especially in cold water. Key specifications include permeate flow rates of 2,750 GPD (10.4 m³/d) for the 4040 model and 1,000 GPD (3.8 m³/d) for the 2540 model, with a stabilized salt rejection of 99.0%.
Specifications
| Feature | XLE PRO-4040 | XLE PRO-2540 |
|---|---|---|
| Part number | 12082995 | 12082909 |
| Active area | 85 ft² (7.9 m²) | 28 ft² (2.6 m²) |
| Permeate flow rate | 2,750 GPD (10.4 m³/d) | 1,000 GPD (3.8 m³/d) |
| Stabilized salt rejection | 99.0% | 99.0% |
| Minimum salt rejection | 97.0% | 97.0% |
| Membrane type | Polyamide Thin-Film Composite | |
Dimensions
| Dimension | XLE PRO-4040 | XLE PRO-2540 |
|---|---|---|
| Length (A) | 40.0 in (1,016 mm) | 40.0 in (1,016 mm) |
| Diameter (B) | 3.9 in (99 mm) | 2.4 in (61 mm) |
| Permeate tube outer diameter (C) | 0.75 in OD (19 mm) | 0.75 in OD (19 mm) |
| D | 1.05 in (27 mm) | 1.19 in (30.2 mm) |
Operating limits for design
| Maximum operating temperature | 113°F (45°C) |
| Maximum operating pressure | 600 psi (41 bar) |
| Maximum pressure drop per element | 13 psi (0.9 bar) |
| Maximum pressure drop per pressure vessel (maximum 2 elements) | 30 psi (2.1 bar) |
| pH range (continuous operation) | 2–11 |
| pH range (short-term cleaning, 30 min) | 1–13 |
| Maximum feed flow rate (4040 / 2540) | 14 gpm (3.2 m³/h) / 6 gpm (1.4 m³/h) |
| Maximum feed silt density index (SDI) | SDI 5 |
| Free chlorine tolerance | < 0.1 ppm |
Important operation notes
- Keep elements moist at all times after initial wetting.
- The maximum temperature for continuous operation above pH 10 is 95°F (35°C).
- Oxidation damage caused by free chlorine or other oxidizing agents is not covered by the warranty; pretreatment to remove free chlorine is recommended.
- Discard the permeate obtained during the first hour of operation.
- Use of this product does not by itself guarantee the removal of cysts and pathogens from water.
Private label and custom versions
DuPont™ FilmTec™ XLE PRO-4040 and XLE PRO-2540 elements are ideal for drinking water and commercial applications in systems up to 2.3 m³/h (10 gpm), such as hotels, restaurants, cafés, car washes, schools and refill stations. Contact our team for commercial inquiries, customization options and technical support.
Benötigen Sie diese Membran für Ihre Anlage?
Wir passen sie an Ihre Anlage an, versehen sie mit Ihrer Marke und begleiten Sie bei der Installation.