Via Caduti sul Lavoro, 6, 61032 Fano (PU), Italien +39 0721 1797741 info@ultramarwater.com
BW30XFRLE-400/34

Filmtec · Brackish Water

BW30XFRLE-400/34

DuPont™ FilmTec™ BW30XFRLE-400/34 Brackish Water Reverse Osmosis Element The DuPont™ FilmTec™ BW30XFRLE-400/34 brackish water reverse osmosis element is designed with fouling-resistant and low-energy features, offering up to 30% lower energy consumption than standard-pressure RO elements and excellent rejection of silica, nitrates, ammonium and per- and polyfluoroalkyl substances (PFAS). Key specifications include an active area of […]

Durchmesser
8″
Format
8040

DuPont™ FilmTec™ BW30XFRLE-400/34 Brackish Water Reverse Osmosis Element

The DuPont™ FilmTec™ BW30XFRLE-400/34 brackish water reverse osmosis element is designed with fouling-resistant and low-energy features, offering up to 30% lower energy consumption than standard-pressure RO elements and excellent rejection of silica, nitrates, ammonium and per- and polyfluoroalkyl substances (PFAS). Key specifications include an active area of 400 ft² (37 m²), a permeate flow rate of 11,500 GPD (43.5 m³/d) and a stabilized salt rejection of 99.3%.

Specifications

FeatureValue / Technical data
Active area400 ft² (37 m²)
Feed spacer thickness34-LDP
Permeate flow rate11,500 GPD (43.5 m³/d)
Stabilized salt rejection99.3%
Minimum salt rejection99.1%
Membrane typePolyamide Thin-Film Composite
General specifications of the BW30XFRLE-400/34 element.

Dimensions

DimensionImperialMetric
Length (A)40.0 in1,016 mm
B DIA7.9 in201 mm
C DIA (ID)1.125 in ID29 mm ID
Dimensions in inches (mm). 1 inch = 25.4 mm.

Operating limits for design

Maximum operating temperature113°F (45°C)
Maximum operating pressure600 psi (41 bar)
Maximum pressure drop per element15 psi (1.0 bar)
Maximum pressure drop per pressure vessel (minimum 4 elements)50 psi (3.5 bar)
pH range (continuous operation)2–11
pH range (short-term cleaning, 30 min)1–13
Maximum feed flow rate75 gpm (17 m³/h)
Maximum feed silt density index (SDI)SDI 5
Free chlorine tolerance< 0.1 ppm

Important operation notes

  • Keep elements moist at all times after initial wetting.
  • The maximum temperature for continuous operation above pH 10 is 95°F (35°C).
  • Oxidation damage caused by free chlorine or other oxidizing agents is not covered by the warranty.
  • Discard the permeate obtained during the first hour of operation.
  • Use of this product does not by itself guarantee the removal of cysts and pathogens from water; effectiveness depends on overall system design and maintenance.

Private label and custom versions

The DuPont™ FilmTec™ BW30XFRLE-400/34 element is ideal for municipal drinking water, municipal and industrial wastewater reuse, and industrial process water applications. Contact our team for commercial inquiries, customization options and technical support.

Benötigen Sie diese Membran für Ihre Anlage?

Wir passen sie an Ihre Anlage an, versehen sie mit Ihrer Marke und begleiten Sie bei der Installation.

Angebot anfordern

Ähnliche Membranen

Adresse

Via Caduti sul Lavoro, 6
61032 Fano (PU), Italien