Via Caduti sul Lavoro, 6, 61032 Fano (PU), Italy +39 0721 1797741 info@ultramarwater.com
SW30HRLE-370/34

Filmtec · Sea Water

SW30HRLE-370/34

DuPont™ FilmTec™ SW30HRLE-370/34 Seawater Reverse Osmosis Element The DuPont™ FilmTec™ SW30HRLE-370/34 seawater reverse osmosis element is designed to deliver high rejection and productivity under difficult or high-fouling feed conditions, reducing operating and maintenance costs. Key specifications include an active area of 370 ft² (34.4 m²), a permeate flow rate of 6,700 gpd (25 m³/d) and […]

Diameter
8″
Format
8040

DuPont™ FilmTec™ SW30HRLE-370/34 Seawater Reverse Osmosis Element

The DuPont™ FilmTec™ SW30HRLE-370/34 seawater reverse osmosis element is designed to deliver high rejection and productivity under difficult or high-fouling feed conditions, reducing operating and maintenance costs. Key specifications include an active area of 370 ft² (34.4 m²), a permeate flow rate of 6,700 gpd (25 m³/d) and a stabilized salt rejection of 99.80%.

Specifications

FeatureValue / Technical Data
Active area370 ft² (34.4 m²)
Feed spacer thickness34 mil
Permeate flow rate6,700 gpd (25 m³/d)
Stabilized boron rejection92%
Stabilized salt rejection99.80%
Membrane typeSpiral-wound element with polyamide thin-film composite membrane
General specifications of the SW30HRLE-370/34 element.

Dimensions

DimensionImperialMetric
Length (A)40.0 in1,016 mm
Inner diameter (B DIA)1.125 in ID29 mm ID
Diameter (C DIA)7.9 in201 mm
Mechanical dimensions of the module.

Operating limits for design

Maximum operating temperature113°F (45°C)
Maximum operating pressure1,200 psig (83 bar)
Maximum pressure drop per element15 psig (1.0 bar)
pH range (continuous operation)2–11
pH range (short-term cleaning, 30 min)1–13
Maximum Silt Density Index (SDI)SDI 5
Free chlorine tolerance< 0.1 ppm

Important operation notes

  • The maximum temperature for continuous operation above pH 10 is 95°F (35°C).
  • The presence of free chlorine and other oxidizing agents causes premature membrane failure and is not covered under warranty.
  • Permeate obtained from the first hour of operation should be discarded.
  • Use of this product does not in itself guarantee the removal of cysts and pathogens from water, which depends on the overall system design and maintenance.

Private label and custom versions

The DuPont™ FilmTec™ SW30HRLE-370/34 element can be integrated into standard seawater treatment systems. Contact our team for commercial inquiries, customization options and technical support.

Need this membrane in your system?

We can adapt it to your plant, label it with your brand and support you through installation.

Request a quote

Similar membranes

Address

Via Caduti sul Lavoro, 6
61032 Fano (PU), Italy

Telephone

+39 0721 1797741