Filmtec · Sea Water
SW30HRLE-370/34
DuPont™ FilmTec™ SW30HRLE-370/34 Seawater Reverse Osmosis Element The DuPont™ FilmTec™ SW30HRLE-370/34 seawater reverse osmosis element is designed to deliver high rejection and productivity under difficult or high-fouling feed conditions, reducing operating and maintenance costs. Key specifications include an active area of 370 ft² (34.4 m²), a permeate flow rate of 6,700 gpd (25 m³/d) and […]
- Durchmesser
- 8″
- Format
- 8040
DuPont™ FilmTec™ SW30HRLE-370/34 Seawater Reverse Osmosis Element
The DuPont™ FilmTec™ SW30HRLE-370/34 seawater reverse osmosis element is designed to deliver high rejection and productivity under difficult or high-fouling feed conditions, reducing operating and maintenance costs. Key specifications include an active area of 370 ft² (34.4 m²), a permeate flow rate of 6,700 gpd (25 m³/d) and a stabilized salt rejection of 99.80%.
Specifications
| Feature | Value / Technical Data |
|---|---|
| Active area | 370 ft² (34.4 m²) |
| Feed spacer thickness | 34 mil |
| Permeate flow rate | 6,700 gpd (25 m³/d) |
| Stabilized boron rejection | 92% |
| Stabilized salt rejection | 99.80% |
| Membrane type | Spiral-wound element with polyamide thin-film composite membrane |
Dimensions
| Dimension | Imperial | Metric |
|---|---|---|
| Length (A) | 40.0 in | 1,016 mm |
| Inner diameter (B DIA) | 1.125 in ID | 29 mm ID |
| Diameter (C DIA) | 7.9 in | 201 mm |
Operating limits for design
| Maximum operating temperature | 113°F (45°C) |
| Maximum operating pressure | 1,200 psig (83 bar) |
| Maximum pressure drop per element | 15 psig (1.0 bar) |
| pH range (continuous operation) | 2–11 |
| pH range (short-term cleaning, 30 min) | 1–13 |
| Maximum Silt Density Index (SDI) | SDI 5 |
| Free chlorine tolerance | < 0.1 ppm |
Important operation notes
- The maximum temperature for continuous operation above pH 10 is 95°F (35°C).
- The presence of free chlorine and other oxidizing agents causes premature membrane failure and is not covered under warranty.
- Permeate obtained from the first hour of operation should be discarded.
- Use of this product does not in itself guarantee the removal of cysts and pathogens from water, which depends on the overall system design and maintenance.
Private label and custom versions
The DuPont™ FilmTec™ SW30HRLE-370/34 element can be integrated into standard seawater treatment systems. Contact our team for commercial inquiries, customization options and technical support.
Benötigen Sie diese Membran für Ihre Anlage?
Wir passen sie an Ihre Anlage an, versehen sie mit Ihrer Marke und begleiten Sie bei der Installation.