Via Caduti sul Lavoro, 6, 61032 Fano (PU), Italy +39 0721 1797741 info@ultramarwater.com
Seamaxx -440i

Filmtec · Sea Water

Seamaxx -440i

DuPont™ FilmTec™ Seamaxx-440i Seawater Reverse Osmosis Element The DuPont™ FilmTec™ Seamaxx-440i seawater reverse osmosis element is designed to deliver very high permeate flow, enabling significant energy savings and reducing system capital costs. It features iLEC™ interlocking endcaps to reduce operating costs and the risk of O-ring leaks. Key specifications include an active area of 440 […]

Diameter
8″
Format
8040

DuPont™ FilmTec™ Seamaxx-440i Seawater Reverse Osmosis Element

The DuPont™ FilmTec™ Seamaxx-440i seawater reverse osmosis element is designed to deliver very high permeate flow, enabling significant energy savings and reducing system capital costs. It features iLEC™ interlocking endcaps to reduce operating costs and the risk of O-ring leaks. Key specifications include an active area of 440 ft² (41 m²), a permeate flow rate of 9,050 gpd (34.2 m³/d) at 600 psi (and up to 17,000 gpd at 800 psi) and a stabilized salt rejection of 99.47%.

Specifications

FeatureValue / Technical Data
Active area440 ft² (41 m²)
Feed spacer thickness28 mil
Permeate flow rate (at 600 psi / 4.1 MPa)9,050 gpd (34.2 m³/d)
Projected permeate flow rate (at 800 psi / 5.5 MPa)17,000 gpd (64.4 m³/d)
Stabilized boron rejection (at 600 psi)81.8%
Stabilized salt rejection (at 600 psi)99.47%
Minimum salt rejection (at 600 psi)99.25%
Membrane typePolyamide Thin-Film Composite
General specifications of the Seamaxx-440i element.

Dimensions

DimensionImperialMetric
Net length (A)40.0 in1,016 mm
Diameter (B)7.9 in201 mm
Inner diameter (C)1.125 in ID29 mm ID
D (D)0.5 in12.7 mm
Mechanical dimensions of the module (single elements with iLEC endcaps measure 40.5 inches / 1,029 mm in overall length).

Operating limits for design

Maximum operating temperature113°F (45°C)
Maximum operating pressure1,200 psi (83 bar)
Maximum pressure drop per element15 psi (1.0 bar)
Maximum pressure drop per pressure vessel (minimum 4 elements)50 psi (3.5 bar)
pH range (continuous operation)2–11
pH range (short-term cleaning, 30 min)1–13
Maximum Silt Density Index (SDI)SDI 5
Free chlorine tolerance< 0.1 ppm

Important operation notes

  • Keep elements moist at all times after initial wetting.
  • The maximum temperature for continuous operation above pH 10 is 95°F (35°C).
  • Oxidation damage caused by free chlorine or other oxidizing agents is not covered under warranty.
  • Permeate obtained from the first hour of operation should be discarded.
  • Use of this product does not in itself guarantee the removal of cysts and pathogens from water; effectiveness depends on the overall system design and maintenance.

Private label and custom versions

The DuPont™ FilmTec™ Seamaxx-440i element is ideal for seawater desalination in municipal and industrial applications with high energy costs. Contact our team for commercial inquiries, customization options and technical support.

Need this membrane in your system?

We can adapt it to your plant, label it with your brand and support you through installation.

Request a quote

Similar membranes

Address

Via Caduti sul Lavoro, 6
61032 Fano (PU), Italy

Telephone

+39 0721 1797741