Ultramar Water · Ultra Low Pressure
ULP-4040-HF-ULTRAMAR-Water
ULP-4040-HF Membrane for Brackish Water Treatment The ULP-4040-HF membrane is a spiral wound element designed for brackish water treatment. Described as a low-pressure, high-productivity solution, it is intended for applications requiring low or ultra-low pressure operation. According to the supplied datasheet, the ULP-4040-HF has a permeate flow of 2,900 GPD (11 m³/day), an active membrane […]
- Diametro
- 4″
- Formato
- 4040
ULP-4040-HF Membrane for Brackish Water Treatment
The ULP-4040-HF membrane is a spiral wound element designed for brackish water treatment. Described as a low-pressure, high-productivity solution, it is intended for applications requiring low or ultra-low pressure operation.
According to the supplied datasheet, the ULP-4040-HF has a permeate flow of 2,900 GPD (11 m³/day), an active membrane area of 90 ft² (8.4 m²), a stabilized salt rejection of 99.0% and a minimum salt rejection of 98.6%. These specifications provide useful reference points for OEMs, water treatment system builders and technical professionals evaluating membrane elements for brackish water applications.
Specifications
| Model | Permeate Flow GPD (m³/day) | Active Membrane Area ft² (m²) | Stabilized Salt Rejection | Minimum Salt Rejection | Feed Spacer mil (mm) | Test Conditions |
|---|---|---|---|---|---|---|
| ULP-4040-HF | 2,900 (11) | 90 (8.4) | 99.0% | 98.6% | 28 (0.7) | 150 psi / 2,000 ppm NaCl |
Dimensions
| Dimension | Measurement |
|---|---|
| Element dimensions | Not specified in the supplied datasheet. |
Operating limits for design
| Maximum Operating Temperature | 45°C (113°F) |
| Maximum Operating Pressure | 600 psi (41 bar) |
| Maximum Pressure Drop (single element) | 15 psi (1.0 bar) |
| pH Range for Continuous Operation | 2–11 |
| pH Range for Cleaning | 2–12 |
| Chlorine Tolerance | < 0.1 ppm |
| Maximum Feed SDI | 5 |
Important operation notes
- Discard the permeate produced during the first hour of use.
- Keep elements moist at all times after initial wetting.
- During prolonged shutdowns, store elements in a preservative solution to prevent biological growth, and rinse it out before use.
- The OEM is responsible for the effects of incompatible chemicals and lubricants on the elements.
- Failure to follow these operating limits voids the limited warranty.
Private label and custom versions
If you are sourcing membrane elements for water treatment systems or OEM projects, contact Ultramar Water to discuss your application requirements and explore the available supply and customization options.
Contact Ultramar Water to discuss your requirements with our team.
Ti serve questa membrana nel tuo impianto?
Possiamo adattarla al tuo impianto, personalizzarla con il tuo marchio e seguirti nell'installazione.
Membrane simili