Ultramar Water · Nano Filtration
NF-8040-400-ULTRAMAR-WATER
NF-8040-400 nanofiltration membrane The NF-8040-400 is an 8-inch spiral wound nanofiltration element designed for low-pressure applications. Offering high productivity and selectivity for water treatment, this element is ideal for original equipment manufacturers (OEMs), system builders, and service centers. Key operational data includes a permeate flow of 11,800 GPD (45 m³/day) with MgSO₄ and 13,800 GPD […]
- Diametro
- 8″
- Formato
- 8040
NF-8040-400 nanofiltration membrane
The NF-8040-400 is an 8-inch spiral wound nanofiltration element designed for low-pressure applications. Offering high productivity and selectivity for water treatment, this element is ideal for original equipment manufacturers (OEMs), system builders, and service centers. Key operational data includes a permeate flow of 11,800 GPD (45 m³/day) with MgSO₄ and 13,800 GPD (52 m³/day) with NaCl, an active membrane area of 400 ft² (37 m²), and a stabilized salt rejection of 98% (MgSO₄) and 40–60% (NaCl).
Specifications
| Model | Permeate Flow GPD (m³/day) | Active Membrane Area ft² (m²) | Stabilized Salt Rejection | Minimum Salt Rejection | Feed Spacer mil (mm) | Test Conditions |
|---|---|---|---|---|---|---|
| NF-8040-400 | 11,800 (45) | 400 (37) | 98% | 97% | 28 (0.7) | 70 psi / 2,000 ppm MgSO₄ |
| NF-8040-400 | 13,800 (52) | 400 (37) | 40–60% | 40–60% | 28 (0.7) | 70 psi / 500 ppm NaCl |
Dimensions
| Model | A | B | C |
|---|---|---|---|
| NF-8040-400 | 40.0 (1016) | 1.125 (29) | 7.9 (201) |
Operating limits for design
| Maximum Operating Temperature | 45°C (113°F) |
| Maximum Operating Pressure | 600 psi (41 bar) |
| Maximum Pressure Drop (single element) | 15 psi (1.0 bar) |
| pH Range for Continuous Operation | 3–10 |
| pH Range for Cleaning | 2–11 |
| Chlorine Tolerance | < 0.1 ppm |
| Maximum Feed SDI | 5 |
Important operation notes
- Discard the permeate produced during the first hour of use.
- Keep elements moist at all times after initial wetting.
- During prolonged shutdowns, store elements in a preservative solution to prevent biological growth, and rinse it out before use.
- The OEM is responsible for the effects of incompatible chemicals and lubricants on the elements.
- Failure to follow these operating limits voids the limited warranty.
Private label and custom versions
The NF-8040-400 is available under your brand. Contact our team for volumes, labeling and custom specifications.
Ti serve questa membrana nel tuo impianto?
Possiamo adattarla al tuo impianto, personalizzarla con il tuo marchio e seguirti nell'installazione.
Membrane simili