Ultramar Water · Nano Filtration
NF-4040-HP-ULTRAMAR-WATER
NF-4040-HP nanofiltration membrane The NF-4040-HP is a 4-inch spiral wound nanofiltration element designed for high-pressure applications. Offering high rejection and productivity for advanced water treatment, this element is ideal for original equipment manufacturers (OEMs), system builders, and service centers. Key operational data includes a permeate flow of 2,100 GPD (8 m³/day) with MgSO₄ and 2,000 […]
- Diametro
- 4″
- Formato
- 4040
NF-4040-HP nanofiltration membrane
The NF-4040-HP is a 4-inch spiral wound nanofiltration element designed for high-pressure applications. Offering high rejection and productivity for advanced water treatment, this element is ideal for original equipment manufacturers (OEMs), system builders, and service centers. Key operational data includes a permeate flow of 2,100 GPD (8 m³/day) with MgSO₄ and 2,000 GPD (8 m³/day) with NaCl, an active membrane area of 90 ft² (8.4 m²), and a stabilized salt rejection of 99% (MgSO₄) and 40–60% (NaCl).
Specifications
| Model | Permeate Flow GPD (m³/day) | Active Membrane Area ft² (m²) | Stabilized Salt Rejection | Minimum Salt Rejection | Feed Spacer mil (mm) | Test Conditions |
|---|---|---|---|---|---|---|
| NF-4040-HP | 2,100 (8) | 90 (8.4) | 99% | 98% | 28 (0.7) | 100 psi / 2,000 ppm MgSO₄ |
| NF-4040-HP | 2,000 (8) | 90 (8.4) | 40–60% | 40–60% | 28 (0.7) | 70 psi / 500 ppm NaCl |
Dimensions
| Model | Overall Length (A) | Permeate Tube Extension (B) | Diameter (C) |
|---|---|---|---|
| NF-4040-HP | 40.0 (1016) | 1.05 (26.7) | 3.9 (99) |
Operating limits for design
| Maximum Operating Temperature | 45°C (113°F) |
| Maximum Operating Pressure | 1200 psi (83 bar) |
| Maximum Pressure Drop (single element) | 15 psi (1.0 bar) |
| pH Range for Continuous Operation | 3–10 |
| pH Range for Cleaning | 2–11 |
| Chlorine Tolerance | < 0.1 ppm |
| Maximum Feed SDI | 5 |
Important operation notes
- Discard the permeate produced during the first hour of use.
- Keep elements moist at all times after initial wetting.
- During prolonged shutdowns, store elements in a preservative solution to prevent biological growth, and rinse it out before use.
- The OEM is responsible for the effects of incompatible chemicals and lubricants on the elements.
- Failure to follow these operating limits voids the limited warranty.
Private label and custom versions
The NF-4040-HP is available under your brand. Contact our team for volumes, labeling and custom specifications.
Ti serve questa membrana nel tuo impianto?
Possiamo adattarla al tuo impianto, personalizzarla con il tuo marchio e seguirti nell'installazione.
Membrane simili