Via Caduti sul Lavoro, 6, 61032 Fano (PU), Italia +39 0721 1797741 info@ultramarwater.com
MB-PRO-95 TR

Integratec

MB-PRO-95 TR

DuPont™ IntegraTec™ MB PRO 95 TR pressurized ultrafiltration module The DuPont™ IntegraTec™ MB PRO 95 TR pressurized ultrafiltration module from the P Series is specifically designed for integration into T-Rack™ systems. It uses innovative Multibore™ PRO PES fiber technology, delivering outstanding physical and chemical resistance, an increased active filtration area to minimize footprint, and an […]

DuPont™ IntegraTec™ MB PRO 95 TR pressurized ultrafiltration module

The DuPont™ IntegraTec™ MB PRO 95 TR pressurized ultrafiltration module from the P Series is specifically designed for integration into T-Rack™ systems. It uses innovative Multibore™ PRO PES fiber technology, delivering outstanding physical and chemical resistance, an increased active filtration area to minimize footprint, and an end-cap design optimized for scalability. Key specifications include an active membrane area of 95 m² (1,023 ft²) and a nominal membrane pore size of 0.02 μm.

Specifications

FeatureValue / Technical data
Part Number / GMIDIN-5122/12071531
Filtration modeIn-Out Pressurized
Membrane typeMultibore™ PRO
Membrane materialPESM
Nominal pore size0.02 μm
Module operating processDead-end
Housing materialPVC-U, white
Active membrane area95 m² (1,023 ft²)
General specifications of the MB PRO 95 TR module.

Dimensions

DimensionMetricImperial
Module length including T-connectors (L)2,101 mm82.7 in
Module diameter (D)250 mm9.8 in
Mechanical dimensions of the module.

Operating limits for design

Operating temperature range1-40 °C (34-104 °F)
Operating pH3-11
Cleaning pH1-13
Maximum operating pressure (inlet pressure)5 bar (73 psi)
Maximum temperature change rate5 °C/min (9 °F/min)
Maximum allowable pressure change rate0.5 bar/s (7.3 psi/s)
Free chlorine tolerance (NaOCl exposure)≤ 250,000 ppm × h (at pH ≥ 9.5)

Important operation notes

  • Avoid sudden pressure changes during start-up, operation, shutdown or cleaning sequences to prevent membrane damage (maximum allowable change 0.5 bar/s).
  • For assembly, refer to the dedicated DuPont™ IntegraTec™ Pressurized UF In-Out P Series Assembly Instructions for T-Rack™ Manual (Form No. 45-D02230-en).
  • During extended system shutdowns, introduce a preservation solution to control biological growth, following the dedicated manual.
  • Modules certified for drinking water require specific conditioning procedures before production.
  • Failure to strictly follow the operating limits and guidelines voids any warranty.

Private label and custom versions

The DuPont™ IntegraTec™ MB PRO 95 TR module can be integrated into advanced rack configurations for T-Rack™ systems. Contact our team for commercial enquiries, customization options and technical support.

Ti serve questa membrana nel tuo impianto?

Possiamo adattarla al tuo impianto, personalizzarla con il tuo marchio e seguirti nell'installazione.

Richiedi un preventivo

Indirizzo

Via Caduti sul Lavoro, 6
61032 Fano (PU), Italia