Integratec
MB-PRO-95 TR
DuPont™ IntegraTec™ MB PRO 95 TR pressurized ultrafiltration module The DuPont™ IntegraTec™ MB PRO 95 TR pressurized ultrafiltration module from the P Series is specifically designed for integration into T-Rack™ systems. It uses innovative Multibore™ PRO PES fiber technology, delivering outstanding physical and chemical resistance, an increased active filtration area to minimize footprint, and an […]
DuPont™ IntegraTec™ MB PRO 95 TR pressurized ultrafiltration module
The DuPont™ IntegraTec™ MB PRO 95 TR pressurized ultrafiltration module from the P Series is specifically designed for integration into T-Rack™ systems. It uses innovative Multibore™ PRO PES fiber technology, delivering outstanding physical and chemical resistance, an increased active filtration area to minimize footprint, and an end-cap design optimized for scalability. Key specifications include an active membrane area of 95 m² (1,023 ft²) and a nominal membrane pore size of 0.02 μm.
Specifications
| Feature | Value / Technical data |
|---|---|
| Part Number / GMID | IN-5122/12071531 |
| Filtration mode | In-Out Pressurized |
| Membrane type | Multibore™ PRO |
| Membrane material | PESM |
| Nominal pore size | 0.02 μm |
| Module operating process | Dead-end |
| Housing material | PVC-U, white |
| Active membrane area | 95 m² (1,023 ft²) |
Dimensions
| Dimension | Metric | Imperial |
|---|---|---|
| Module length including T-connectors (L) | 2,101 mm | 82.7 in |
| Module diameter (D) | 250 mm | 9.8 in |
Operating limits for design
| Operating temperature range | 1-40 °C (34-104 °F) |
| Operating pH | 3-11 |
| Cleaning pH | 1-13 |
| Maximum operating pressure (inlet pressure) | 5 bar (73 psi) |
| Maximum temperature change rate | 5 °C/min (9 °F/min) |
| Maximum allowable pressure change rate | 0.5 bar/s (7.3 psi/s) |
| Free chlorine tolerance (NaOCl exposure) | ≤ 250,000 ppm × h (at pH ≥ 9.5) |
Important operation notes
- Avoid sudden pressure changes during start-up, operation, shutdown or cleaning sequences to prevent membrane damage (maximum allowable change 0.5 bar/s).
- For assembly, refer to the dedicated DuPont™ IntegraTec™ Pressurized UF In-Out P Series Assembly Instructions for T-Rack™ Manual (Form No. 45-D02230-en).
- During extended system shutdowns, introduce a preservation solution to control biological growth, following the dedicated manual.
- Modules certified for drinking water require specific conditioning procedures before production.
- Failure to strictly follow the operating limits and guidelines voids any warranty.
Private label and custom versions
The DuPont™ IntegraTec™ MB PRO 95 TR module can be integrated into advanced rack configurations for T-Rack™ systems. Contact our team for commercial enquiries, customization options and technical support.
Benötigen Sie diese Membran für Ihre Anlage?
Wir passen sie an Ihre Anlage an, versehen sie mit Ihrer Marke und begleiten Sie bei der Installation.