Via Caduti sul Lavoro, 6, 61032 Fano (PU), Italia +39 0721 1797741 info@ultramarwater.com
SOAR-4000i

Filmtec · CCRO

SOAR-4000i

DuPont™ FilmTec™ SOAR 4000i Low-Energy, Fouling-Resistant Reverse Osmosis Element The DuPont™ FilmTec™ SOAR 4000i brackish water reverse osmosis element is designed for DesaliTec™ CCRO systems, combining the versatility of the CCRO process with the innovation of FilmTec™ membranes. It features a fouling-resistant design, a durable membrane with cleaning tolerance across a wide pH range (1 […]

DuPont™ FilmTec™ SOAR 4000i Low-Energy, Fouling-Resistant Reverse Osmosis Element

The DuPont™ FilmTec™ SOAR 4000i brackish water reverse osmosis element is designed for DesaliTec™ CCRO systems, combining the versatility of the CCRO process with the innovation of FilmTec™ membranes. It features a fouling-resistant design, a durable membrane with cleaning tolerance across a wide pH range (1 to 13) and iLEC™ interlocking endcaps to reduce operating costs and the risk of O-ring leaks. Key specifications include an active area of 400 ft² (37 m²), a permeate flow rate of 15,000 gpd (56 m³/d), a stabilized salt rejection of 99.4% and a minimum salt rejection of 99.2%.

Specifications

FeatureValue / Technical Data
Active area400 ft² (37 m²)
Permeate flow rate15,000 gpd (56 m³/d)
Stabilized salt rejection99.4%
Minimum salt rejection99.2%
Membrane typePolyamide Thin-Film Composite
General specifications of the SOAR 4000i element.

Dimensions

DimensionImperialMetric
Net length (A)40.0 in1,016 mm
Diameter (B)7.9 in201 mm
Inner diameter (C)1.125 in ID29 mm ID
D (D)0.5 in12.7 mm
Mechanical dimensions of the module (single elements with iLEC endcaps measure 40.5 inches / 1,029 mm in overall length).

Operating limits for design

Maximum operating temperature113°F (45°C)
Maximum operating pressure600 psi (41 bar)
Maximum pressure drop per element15 psi (1.0 bar)
Maximum pressure drop per pressure vessel (minimum 4 elements)50 psi (3.5 bar)
pH range (continuous operation)2–11
pH range (short-term cleaning, 30 min)1–13
Maximum Silt Density Index (SDI)SDI 5
Free chlorine tolerance< 0.1 ppm

Important operation notes

  • Keep elements moist at all times after initial wetting.
  • The maximum temperature for continuous operation above pH 10 is 95°F (35°C).
  • Oxidation damage caused by free chlorine or other oxidizing agents is not covered under warranty; removal of free chlorine by pretreatment is recommended prior to membrane exposure.
  • Permeate obtained from the first hour of operation should be discarded.
  • Avoid static permeate-side backpressure at all times.

Private label and custom versions

The DuPont™ FilmTec™ SOAR 4000i element is ideal for DesaliTec™ CCRO systems, municipal drinking water applications (including trace contaminant removal), industrial process water, and municipal and industrial wastewater reuse. Contact our team for commercial inquiries, customization options and technical support.

Ti serve questa membrana nel tuo impianto?

Possiamo adattarla al tuo impianto, personalizzarla con il tuo marchio e seguirti nell'installazione.

Richiedi un preventivo

Membrane simili

Indirizzo

Via Caduti sul Lavoro, 6
61032 Fano (PU), Italia