Filmtec · Brackish Water
BW30HRLE-440i
DuPont™ FilmTec™ BW30HRLE-440i Brackish Water Reverse Osmosis Element The DuPont™ FilmTec™ BW30HRLE-440i brackish water reverse osmosis element offers good salt rejection with lower energy consumption, excellent rejection of silica, boron, nitrates, IPA and ammonium, and integrated iLEC™ interlocking endcaps that reduce operating costs and the risk of O-ring leaks. Key specifications include an active area […]
- Diametro
- 8″
- Formato
- 8040
DuPont™ FilmTec™ BW30HRLE-440i Brackish Water Reverse Osmosis Element
The DuPont™ FilmTec™ BW30HRLE-440i brackish water reverse osmosis element offers good salt rejection with lower energy consumption, excellent rejection of silica, boron, nitrates, IPA and ammonium, and integrated iLEC™ interlocking endcaps that reduce operating costs and the risk of O-ring leaks. Key specifications include an active area of 440 ft² (41 m²), a permeate flow rate of 12,650 GPD (48 m³/d) and a stabilized salt rejection of 99.3%.
Specifications
| Feature | Value / Technical data |
|---|---|
| Active area | 440 ft² (41 m²) |
| Feed spacer thickness | 28 mil |
| Permeate flow rate | 12,650 GPD (48 m³/d) |
| Stabilized salt rejection | 99.3% |
| Minimum salt rejection | 99.1% |
| Membrane type | Polyamide Thin-Film Composite |
Dimensions
| Dimension | Imperial | Metric |
|---|---|---|
| Net length (A) | 40.0 in | 1,016 mm |
| B DIA | 7.9 in | 201 mm |
| C DIA (ID) | 1.125 in ID | 29 mm ID |
| D | 0.5 in | 12.7 mm |
Operating limits for design
| Maximum operating temperature | 113°F (45°C) |
| Maximum operating pressure | 600 psi (41 bar) |
| Maximum pressure drop per element | 15 psi (1.0 bar) |
| Maximum pressure drop per pressure vessel (minimum 4 elements) | 50 psi (3.5 bar) |
| pH range (continuous operation) | 2–11 |
| pH range (short-term cleaning, 30 min) | 1–13 |
| Maximum feed flow rate | 75 gpm (17 m³/h) |
| Maximum feed silt density index (SDI) | SDI 5 |
| Free chlorine tolerance | < 0.1 ppm |
Important operation notes
- Keep elements moist at all times after initial wetting.
- The maximum temperature for continuous operation above pH 10 is 95°F (35°C).
- Oxidation damage caused by free chlorine or other oxidizing agents is not covered by the warranty.
- Discard the permeate obtained during the first hour of operation.
- Use of this product does not by itself guarantee the removal of cysts and pathogens from water; effectiveness depends on overall system design and maintenance.
Private label and custom versions
The DuPont™ FilmTec™ BW30HRLE-440i element is ideal for second-pass RO applications (such as industrial process water and seawater desalination) and for ultrapure water production. Contact our team for commercial inquiries, customization options and technical support.
Ti serve questa membrana nel tuo impianto?
Possiamo adattarla al tuo impianto, personalizzarla con il tuo marchio e seguirti nell'installazione.
Membrane simili