Via Caduti sul Lavoro, 6, 61032 Fano (PU), Italia +39 0721 1797741 info@ultramarwater.com
TW30-2026

Filmtec · Brackish Water

TW30-2026

DuPont™ FilmTec™ Brackish Water Range Overview (Small Commercial Systems) The DuPont™ FilmTec™ brackish water reverse osmosis element range (including the TW30 and XLE models for small commercial systems) is available in a variety of sizes to meet a wide range of space requirements. In particular, FilmTec™ XLE extra low energy elements operate at the industry’s […]

Diametro
2″
Formato
2026

DuPont™ FilmTec™ Brackish Water Range Overview (Small Commercial Systems)

The DuPont™ FilmTec™ brackish water reverse osmosis element range (including the TW30 and XLE models for small commercial systems) is available in a variety of sizes to meet a wide range of space requirements. In particular, FilmTec™ XLE extra low energy elements operate at the industry’s lowest pressure, reducing energy costs and allowing system builders to use lower-cost components. The series offers permeate flow rates ranging from 200 GPD (0.76 m³/d) to 1,025 GPD (3.88 m³/d), with a stabilized salt rejection between 99.0% and 99.5%.

Specifications

Element modelPart numberMax. feed flow, gpm (m³/h)Applied pressure, psi (bar)Permeate flow, GPD (m³/d)Stabilized salt rejection (%)
FilmTec™ TW30-2026806355 (1.1)225 (15.5)220 (0.83)99.5
FilmTec™ TW30-2514806396 (1.4)225 (15.5)200 (0.76)99.5
FilmTec™ TW30-2521806416 (1.4)225 (15.5)325 (1.23)99.5
FilmTec™ XLE-25211545306 (1.4)100 (6.9)365 (1.38)99.0
FilmTec™ TW30-40148060514 (3.2)225 (15.5)525 (1.99)99.5
FilmTec™ TW30-40218060814 (3.2)225 (15.5)900 (3.41)99.5
FilmTec™ XLE-402115454014 (3.2)100 (6.9)1,025 (3.88)99.0
Typical properties and specifications of the brackish water range.

Dimensions

Element modelLength (A)Diameter (B)Permeate tube diameter (C)D
TW30-202626.0 in (660 mm)1.8 in (46 mm)0.68 in (17 mm)1.18 in (30 mm)
TW30-2514 / XLE-251414.0 in (356 mm)2.4 in (61 mm)0.75 in (19 mm)1.05 in (26.7 mm)
TW30-2521 / XLE-252121.0 in (533 mm)2.4 in (61 mm)0.75 in (19 mm)1.19 in (30.2 mm)
TW30-401414.0 in (356 mm)3.9 in (99 mm)0.75 in (19 mm)1.19 in (30 mm)
TW30-4021 / XLE-402121.0 in (533 mm)3.9 in (99 mm)0.75 in (19 mm)1.05 in (26.7 mm)
Dimensions in inches (mm). 1 inch = 25.4 mm.

Operating limits for design

Membrane typePolyamide Thin-Film Composite
Maximum operating temperature113°F (45°C)
Maximum operating pressure600 psi (41 bar)
Maximum pressure drop per element13 psi (0.9 bar)
Maximum pressure drop per pressure vessel (maximum 2 elements)30 psi (2.1 bar)
pH range (continuous operation)2–11
pH range (short-term cleaning, 30 min)1–13
Maximum feed silt density index (SDI)SDI 5
Free chlorine tolerance< 0.1 ppm

Important operation notes

  • Keep elements moist at all times after initial wetting.
  • To prevent biological growth during prolonged shutdowns, immersing elements in a preservative solution is recommended.
  • The customer is fully responsible for the effects of incompatible chemicals and lubricants on the elements.
  • Avoid static permeate-side backpressure at all times.
  • Discard the permeate obtained during the first hour of operation.

Private label and custom versions

The DuPont™ FilmTec™ brackish water element range is ideal for integration into small commercial purification systems. Contact our team for commercial inquiries, customization options and technical support.

Ti serve questa membrana nel tuo impianto?

Possiamo adattarla al tuo impianto, personalizzarla con il tuo marchio e seguirti nell'installazione.

Richiedi un preventivo

Membrane simili

Indirizzo

Via Caduti sul Lavoro, 6
61032 Fano (PU), Italia