Via Caduti sul Lavoro, 6, 61032 Fano (PU), Italia +39 0721 1797741 info@ultramarwater.com
BW30-PRO-400

Filmtec · Brackish Water

BW30-PRO-400

DuPont™ FilmTec™ BW30 PRO-400 Brackish Water Reverse Osmosis Element The DuPont™ FilmTec™ BW30 PRO-400 brackish water reverse osmosis element delivers consistent water quality and higher rejection and flow than the previous BW30 generation, building on the industry-standard membrane with decades of proven performance. Key specifications include an active area of 400 ft² (37 m²), a […]

Diametro
8″
Formato
8040

DuPont™ FilmTec™ BW30 PRO-400 Brackish Water Reverse Osmosis Element

The DuPont™ FilmTec™ BW30 PRO-400 brackish water reverse osmosis element delivers consistent water quality and higher rejection and flow than the previous BW30 generation, building on the industry-standard membrane with decades of proven performance. Key specifications include an active area of 400 ft² (37 m²), a permeate flow rate of 11,000 GPD (42 m³/d) and a stabilized salt rejection of 99.6%.

Specifications

FeatureValue / Technical data
Active area400 ft² (37 m²)
Feed spacer thickness28 mil
Permeate flow rate11,000 GPD (42 m³/d)
Stabilized salt rejection99.6%
Minimum salt rejection99.4%
Membrane typePolyamide Thin-Film Composite
General specifications of the BW30 PRO-400 element.

Dimensions

DimensionImperialMetric
Length (A)40.0 in1,016 mm
B DIA7.9 in201 mm
C DIA (ID)1.125 in ID29 mm ID
Dimensions in inches (mm). 1 inch = 25.4 mm.

Operating limits for design

Maximum operating temperature113°F (45°C)
Maximum operating pressure600 psi (41 bar)
Maximum pressure drop per element15 psi (1.0 bar)
Maximum pressure drop per pressure vessel (minimum 4 elements)50 psi (3.5 bar)
pH range (continuous operation)2–11
pH range (short-term cleaning, 30 min)1–13
Maximum feed flow rate75 gpm (17 m³/h)
Maximum feed silt density index (SDI)SDI 5
Free chlorine tolerance< 0.1 ppm

Important operation notes

  • Keep elements moist at all times after initial wetting.
  • The maximum temperature for continuous operation above pH 10 is 95°F (35°C).
  • Oxidation damage caused by free chlorine or other oxidizing agents is not covered by the warranty.
  • Discard the permeate obtained during the first hour of operation.
  • Use of this product does not by itself guarantee the removal of cysts and pathogens from water; effectiveness depends on overall system design and maintenance.

Private label and custom versions

The DuPont™ FilmTec™ BW30 PRO-400 element is ideal for demineralization in industrial applications (power generation, steel and metals, chemical and petrochemical) and for municipal water purification. Contact our team for commercial inquiries, customization options and technical support.

Ti serve questa membrana nel tuo impianto?

Possiamo adattarla al tuo impianto, personalizzarla con il tuo marchio e seguirti nell'installazione.

Richiedi un preventivo

Membrane simili

Indirizzo

Via Caduti sul Lavoro, 6
61032 Fano (PU), Italia