Via Caduti sul Lavoro, 6, 61032 Fano (PU), Italien +39 0721 1797741 info@ultramarwater.com
Residential-ULTRAMAR-Water-RO-element-UW-3013-600

Ultramar Water · Residential

Residential-ULTRAMAR-Water-RO-element-UW-3013-600

UW-3013-600 residential reverse osmosis membrane The UW-3013-600 is a residential reverse osmosis membrane for drinking water, designed to deliver high reliability and consistent performance. Thanks to advanced technology and rigorous control of the rolling process, Ultramar Water elements ensure a high level of salt rejection with minimal reduction in water flux, and are certified by […]

Durchmesser
3″
Format
3013

UW-3013-600 residential reverse osmosis membrane

The UW-3013-600 is a residential reverse osmosis membrane for drinking water, designed to deliver high reliability and consistent performance. Thanks to advanced technology and rigorous control of the rolling process, Ultramar Water elements ensure a high level of salt rejection with minimal reduction in water flux, and are certified by NSF. Key operational data includes a water yield of 600 GPD and a ratio of desalinization of 96%.

Specifications

ModelWater Yield (GPD)Ratio of DesalinizationTest Conditions
UW-3013-60060096%25°C, 250 ppm NaCl solution, 100 psi and 15% recovery rate
Test conditions: 25°C (77°F), 250 ppm NaCl solution, 100 psi and 15% recovery rate. Permeate flow for a single element may vary ±15%.

Dimensions

ModelABCDE
UW-3013-60012.99 (330)0.98 (25)0.68 (17)2.70 (68.5)11.02 (280)
Dimensions in inches (mm). 1 inch = 25.4 mm. Home drinking water elements seal at a standard 2.0 in I.D. within pressure vessels.

Operating limits for design

Membrane TypePolyamide Thin-Film Composite
Maximum Operating Temperature45°C (113°F)
Maximum Operating Pressure300 psi (21 bar)
pH Range, Continuous Operation2–11
pH Range, Short-Term Cleaning (30 min)1–12
Maximum Feed Silt Density Index (SDI)5
Free Chlorine Tolerance< 0.1 ppm

Important operation notes

  • Discard the permeate produced during the first hour of use.
  • Keep elements moist at all times after initial wetting.
  • During prolonged shutdowns, store elements in a preservative solution to prevent biological growth, and rinse it out before use.
  • The OEM is fully responsible for the effects of incompatible chemicals and lubricants on the elements.
  • Failure to strictly follow the operating limits and guidelines voids the limited warranty.

Private label and custom versions

The UW-3013-600 is available under your brand. Contact our team for volumes, labeling and custom specifications.

Benötigen Sie diese Membran für Ihre Anlage?

Wir passen sie an Ihre Anlage an, versehen sie mit Ihrer Marke und begleiten Sie bei der Installation.

Angebot anfordern

Ähnliche Membranen

Adresse

Via Caduti sul Lavoro, 6
61032 Fano (PU), Italien