Via Caduti sul Lavoro, 6, 61032 Fano (PU), Italien +39 0721 1797741 info@ultramarwater.com
ULP-4040-ULTRAMAR-WATER

Ultramar Water · Ultra Low Pressure

ULP-4040-ULTRAMAR-WATER

ULP-4040 Membrane for Brackish Water Treatment The ULP-4040 membrane is a spiral wound element designed for brackish water treatment. Described in the datasheet as a low-pressure, high-productivity solution, it is intended for applications requiring low or ultra-low pressure operation. The ULP-4040 has a permeate flow of 2,500 GPD (9.5 m³/day), an active membrane area of […]

Durchmesser
4″
Format
4040

ULP-4040 Membrane for Brackish Water Treatment

The ULP-4040 membrane is a spiral wound element designed for brackish water treatment. Described in the datasheet as a low-pressure, high-productivity solution, it is intended for applications requiring low or ultra-low pressure operation.

The ULP-4040 has a permeate flow of 2,500 GPD (9.5 m³/day), an active membrane area of 90 ft² (8.4 m²), a stabilized salt rejection of 99.2% and a minimum salt rejection of 99.0%. These technical specifications help OEMs, water treatment system builders and technical professionals evaluate the membrane for brackish water treatment applications.

Specifications

ModelPermeate Flow GPD (m³/day)Active Membrane Area ft² (m²)Stabilized Salt RejectionMinimum Salt RejectionFeed Spacer mil (mm)Test Conditions
ULP-40402,500 (9.5)90 (8.4)99.2%99.0%28 (0.7)150 psi / 2,000 ppm NaCl
All performance data are collected at 25°C (77°F), pH 7.5 and 15% recovery rate. Permeate flow for a single element may vary ±15%.

Dimensions

DimensionMeasurement
Element dimensionsNot specified in the supplied datasheet.
Dimensions in inches (mm). 1 inch = 25.4 mm.

Operating limits for design

Maximum Operating Temperature45°C (113°F)
Maximum Operating Pressure600 psi (41 bar)
Maximum Pressure Drop (single element)15 psi (1.0 bar)
pH Range for Continuous Operation2–11
pH Range for Cleaning2–12
Chlorine Tolerance< 0.1 ppm
Maximum Feed SDI5

Important operation notes

  • Discard the permeate produced during the first hour of use.
  • Keep elements moist at all times after initial wetting.
  • During prolonged shutdowns, store elements in a preservative solution to prevent biological growth, and rinse it out before use.
  • The OEM is responsible for the effects of incompatible chemicals and lubricants on the elements.
  • Failure to follow these operating limits voids the limited warranty.

Private label and custom versions

If you are sourcing membrane elements for water treatment systems or OEM projects, contact Ultramar Water to discuss your application requirements and explore the available supply and customization options.

Contact Ultramar Water to discuss your requirements with our team.

Benötigen Sie diese Membran für Ihre Anlage?

Wir passen sie an Ihre Anlage an, versehen sie mit Ihrer Marke und begleiten Sie bei der Installation.

Angebot anfordern

Ähnliche Membranen

Adresse

Via Caduti sul Lavoro, 6
61032 Fano (PU), Italien