Ultramar Water · Ultra Low Pressure
ULP-2540-ULTRAMAR-WATER
ULP-2540 Brackish Water RO Membrane for Low-Pressure Applications The ULP-2540 brackish water RO membrane is a 2.5-inch spiral-wound element designed for low or ultra-low pressure brackish water treatment. According to the technical datasheet, it provides a permeate flow of 758 GPD (2.9 m³/day), an active membrane area of 27 ft² (2.5 m²) and a stabilized […]
- Durchmesser
- 2,5″
- Format
- 2540
ULP-2540 Brackish Water RO Membrane for Low-Pressure Applications
The ULP-2540 brackish water RO membrane is a 2.5-inch spiral-wound element designed for low or ultra-low pressure brackish water treatment. According to the technical datasheet, it provides a permeate flow of 758 GPD (2.9 m³/day), an active membrane area of 27 ft² (2.5 m²) and a stabilized salt rejection of 99.2%.
Ultramar Water supplies membrane elements for water-treatment professionals, including system builders, OEMs and industrial water-treatment specialists. The ULP-2540 can be evaluated for brackish water reverse osmosis systems where low-pressure operation and productivity are important design considerations. Review the technical specifications and operating limits below when assessing its suitability for your application.
Specifications
| Model | Permeate Flow GPD (m³/day) | Active Membrane Area ft² (m²) | Stabilized Salt Rejection | Feed Spacer mil (mm) | Test Conditions |
|---|---|---|---|---|---|
| ULP-2540 | 758 (2.9) | 27 (2.5) | 99.2% | 28 (0.7) | 150 psi / 2,000 ppm NaCl |
Dimensions
The dimensional drawing in the supplied datasheet does not provide clearly readable numerical measurements for the ULP-2540 model.
Dimensions in inches (mm). 1 inch = 25.4 mm.
Operating limits for design
| Maximum Operating Temperature | 45°C (113°F) |
| Maximum Operating Pressure | 600 psi (41 bar) |
| Maximum Pressure Drop (single element) | 15 psi (1.0 bar) |
| pH Range for Continuous Operation | 2–11 |
| pH Range for Cleaning | 2–12 |
| Chlorine Tolerance | < 0.1 ppm |
| Maximum Feed SDI | 5 |
Important operation notes
- Discard the permeate produced during the first hour of use.
- Keep elements moist at all times after initial wetting.
- During prolonged shutdowns, store elements in a preservative solution to prevent biological growth, and rinse it out before use.
- The OEM is responsible for the effects of incompatible chemicals and lubricants on the elements.
- Failure to follow these operating limits voids the limited warranty.
Private label and custom versions
For OEM projects and specific water-treatment requirements, contact Ultramar Water to discuss your application and product requirements. To inquire about private label supply or customized solutions, contact our team.
Benötigen Sie diese Membran für Ihre Anlage?
Wir passen sie an Ihre Anlage an, versehen sie mit Ihrer Marke und begleiten Sie bei der Installation.
Ähnliche Membranen