Via Caduti sul Lavoro, 6, 61032 Fano (PU), Italien +39 0721 1797741 info@ultramarwater.com
SW30XLE-440

Filmtec · Sea Water

SW30XLE-440

DuPont™ FilmTec™ SW30XLE-440 Seawater Reverse Osmosis Element The DuPont™ FilmTec™ SW30XLE-440 seawater reverse osmosis element ensures a low total cost of water by optimizing system energy consumption and productivity, helping to reduce capital costs by maximizing production capacity. It is ideal for municipal and industrial desalination plants with medium or high salinity. Key specifications include […]

Durchmesser
8″
Format
8040

DuPont™ FilmTec™ SW30XLE-440 Seawater Reverse Osmosis Element

The DuPont™ FilmTec™ SW30XLE-440 seawater reverse osmosis element ensures a low total cost of water by optimizing system energy consumption and productivity, helping to reduce capital costs by maximizing production capacity. It is ideal for municipal and industrial desalination plants with medium or high salinity. Key specifications include an active area of 440 ft² (41 m²), a permeate flow rate of 9,900 gpd (37.4 m³/d) and a stabilized salt rejection of 99.8%.

Specifications

FeatureValue / Technical Data
Active area440 ft² (41 m²)
Feed spacer thickness28 mil
Permeate flow rate9,900 gpd (37.4 m³/d)
Stabilized boron rejection91.5%
Stabilized salt rejection99.8%
Minimum salt rejection99.6%
Membrane typePolyamide Thin-Film Composite
General specifications of the SW30XLE-440 element.

Dimensions

DimensionImperialMetric
Length (A)40.0 in1,016 mm
Diameter (B)7.9 in201 mm
Inner diameter (C)1.125 in ID29 mm ID
Mechanical dimensions of the module.

Operating limits for design

Maximum operating temperature113°F (45°C)
Maximum operating pressure1,200 psi (83 bar)
Maximum pressure drop per element15 psi (1.0 bar)
Maximum pressure drop per pressure vessel (minimum 4 elements)50 psi (3.5 bar)
pH range (continuous operation)2–11
pH range (short-term cleaning, 30 min)1–13
Maximum Silt Density Index (SDI)SDI 5
Free chlorine tolerance< 0.1 ppm

Important operation notes

  • Keep elements moist at all times after initial wetting.
  • The maximum temperature for continuous operation above pH 10 is 95°F (35°C).
  • Oxidation damage caused by free chlorine or other oxidizing agents is not covered under warranty.
  • Permeate obtained from the first hour of operation should be discarded.
  • Use of this product does not in itself guarantee the removal of cysts and pathogens from water; effectiveness depends on the overall system design and maintenance.

Private label and custom versions

The DuPont™ FilmTec™ SW30XLE-440 element can be integrated into desalination systems for high-productivity, low-energy municipal and industrial applications. Contact our team for commercial inquiries, customization options and technical support.

Benötigen Sie diese Membran für Ihre Anlage?

Wir passen sie an Ihre Anlage an, versehen sie mit Ihrer Marke und begleiten Sie bei der Installation.

Angebot anfordern

Ähnliche Membranen

Adresse

Via Caduti sul Lavoro, 6
61032 Fano (PU), Italien