Via Caduti sul Lavoro, 6, 61032 Fano (PU), Italien +39 0721 1797741 info@ultramarwater.com
BW30 PRO-4040 & BW30 PRO-2540

Filmtec · Brackish Water

BW30 PRO-4040 & BW30 PRO-2540

DuPont™ FilmTec™ BW30 PRO-4040 & BW30 PRO-2540 Reverse Osmosis Elements DuPont™ FilmTec™ BW30 PRO-4040 and BW30 PRO-2540 reverse osmosis elements are designed for large commercial systems under challenging water conditions, delivering consistent water quality and higher rejection and flow than the previous BW30 generation. Based on the industry-standard membrane with decades of proven performance, they […]

Durchmesser
2,5″ · 4″
Format
2540, 4040

DuPont™ FilmTec™ BW30 PRO-4040 & BW30 PRO-2540 Reverse Osmosis Elements

DuPont™ FilmTec™ BW30 PRO-4040 and BW30 PRO-2540 reverse osmosis elements are designed for large commercial systems under challenging water conditions, delivering consistent water quality and higher rejection and flow than the previous BW30 generation. Based on the industry-standard membrane with decades of proven performance, they provide advanced fouling protection. Key specifications include permeate flow rates of 2,600 GPD (9.8 m³/d) for the 4040 model and 1,000 GPD (3.8 m³/d) for the 2540 model, with a stabilized salt rejection of 99.7%.

Specifications

Element modelPart numberActive area, ft² (m²)Permeate flow, GPD (m³/d)Stabilized salt rejection (%)Minimum salt rejection (%)
FilmTec™ BW30 PRO-40401208052485 (7.9)2,600 (9.8)99.799.5
FilmTec™ BW30 PRO-25401208102328 (2.6)1,000 (3.8)99.799.5
Typical properties and specifications of the BW30 PRO series.

Dimensions

DimensionBW30 PRO-4040BW30 PRO-2540
Length (A)40.0 in (1,016 mm)40.0 in (1,016 mm)
Diameter (B)3.9 in (99 mm)2.4 in (61 mm)
Permeate tube diameter (C)0.75 in (19 mm)0.75 in (19 mm)
D1.05 in (27 mm)1.19 in (30.2 mm)
Dimensions in inches (mm). 1 inch = 25.4 mm. The 4040 model fits 4-inch pressure vessels; the 2540 model fits 2.5-inch ID pressure vessels.

Operating limits for design

Membrane typePolyamide Thin-Film Composite
Maximum operating temperature113°F (45°C)
Maximum operating pressure600 psi (41 bar)
Maximum pressure drop per element15 psi (1.0 bar)
Maximum pressure drop per pressure vessel50 psi (3.5 bar)
pH range (continuous operation)2–11
pH range (short-term cleaning, 30 min)1–13
Maximum feed flow rate (4040 elements)16 gpm (3.6 m³/h)
Maximum feed flow rate (2540 elements)6 gpm (1.4 m³/h)
Maximum feed silt density index (SDI)SDI 5
Free chlorine tolerance< 0.1 ppm

Important operation notes

  • Keep elements moist at all times after initial wetting.
  • To prevent biological growth during prolonged shutdowns, immersing elements in a preservative solution is recommended.
  • The customer is fully responsible for the effects of incompatible chemicals and lubricants on the elements.
  • Avoid static permeate-side backpressure at all times.
  • Discard the permeate obtained during the first hour of operation.

Private label and custom versions

DuPont™ FilmTec™ BW30 PRO elements are ideal for light industrial and drinking water applications that require stringent permeate quality under challenging feed conditions. Contact our team for commercial inquiries, customization options and technical support.

Benötigen Sie diese Membran für Ihre Anlage?

Wir passen sie an Ihre Anlage an, versehen sie mit Ihrer Marke und begleiten Sie bei der Installation.

Angebot anfordern

Ähnliche Membranen

Adresse

Via Caduti sul Lavoro, 6
61032 Fano (PU), Italien