Via Caduti sul Lavoro, 6, 61032 Fano (PU), Italy +39 0721 1797741 info@ultramarwater.com
XULP-8040-400-ULTRAMAR-WATER

Ultramar Water · Extreme Ultra Low Pressure

XULP-8040-400-ULTRAMAR-WATER

XULP-8040-400 brackish water reverse osmosis membrane The XULP-8040-400 is an 8-inch spiral-wound brackish water reverse osmosis membrane, designed for low and ultra-low pressure applications in brackish water treatment. Offering an optimal balance between low-pressure operation and high productivity, this element is ideal for OEMs, system builders and service centers. Key operating data include a permeate […]

Diameter
8″
Format
8040

XULP-8040-400 brackish water reverse osmosis membrane

The XULP-8040-400 is an 8-inch spiral-wound brackish water reverse osmosis membrane, designed for low and ultra-low pressure applications in brackish water treatment. Offering an optimal balance between low-pressure operation and high productivity, this element is ideal for OEMs, system builders and service centers. Key operating data include a permeate flow of 10,600 GPD (40 m³/day), an active membrane area of 400 ft² (37 m²) and a stabilized salt rejection of 99.2%.

Specifications

ModelPermeate Flow GPD (m³/day)Active Membrane Area ft² (m²)Stabilized Salt RejectionMinimum Salt RejectionFeed Spacer mil (mm)Test Conditions
XULP-8040-40010,600 (40)400 (37)99.2%99.0%28 (0.7)100 psi / 500 ppm NaCl
1. All performance data are collected at 25°C (77°F), pH 7.5 and 15% recovery rate. 2. Permeate flow for a single element may vary ±15%.

Dimensions

ModelABC
XULP-8040-40040.0 (1016)1.125 (29)7.9 (201)
Dimensions in inches (mm). 1 inch = 25.4 mm.

Operating limits for design

Maximum Operating Temperature45°C (113°F)
Maximum Operating Pressure600 psi (41 bar)
Maximum Pressure Drop (single element)15 psi (1.0 bar)
pH Range for Continuous Operation2–11
pH Range for Cleaning2–12
Chlorine Tolerance< 0.1 ppm
Maximum Feed SDI5

Important operation notes

  • Discard the permeate produced during the first hour of use.
  • Keep elements moist at all times after initial wetting.
  • During prolonged shutdowns, store elements in a preservative solution to prevent biological growth, and rinse it out before use.
  • The OEM is responsible for the effects of incompatible chemicals and lubricants on the elements.
  • Failure to follow these operating limits voids the limited warranty.

Private label and custom versions

The XULP-8040-400 is available under your brand. Contact our team for volumes, labeling and custom specifications.

Need this membrane in your system?

We can adapt it to your plant, label it with your brand and support you through installation.

Request a quote

Similar membranes

Address

Via Caduti sul Lavoro, 6
61032 Fano (PU), Italy

Telephone

+39 0721 1797741