Via Caduti sul Lavoro, 6, 61032 Fano (PU), Italy +39 0721 1797741 info@ultramarwater.com
NF90-400/34i

Filmtec · Nano Filtration

NF90-400/34i

DuPont™ FilmTec™ NF270-400/34i Nanofiltration Element The DuPont™ FilmTec™ NF270-400/34i nanofiltration element offers high rejection of total organic carbon (TOC), trihalomethane (THM) precursors and per- and polyfluoroalkyl substances (PFAS), while ensuring medium to high salt passage and medium hardness passage. Thanks to iLEC™ interlocking endcaps, the module reduces operating costs and the risk of O-ring leaks. […]

Diameter
8″
Format
8040

DuPont™ FilmTec™ NF270-400/34i Nanofiltration Element

The DuPont™ FilmTec™ NF270-400/34i nanofiltration element offers high rejection of total organic carbon (TOC), trihalomethane (THM) precursors and per- and polyfluoroalkyl substances (PFAS), while ensuring medium to high salt passage and medium hardness passage. Thanks to iLEC™ interlocking endcaps, the module reduces operating costs and the risk of O-ring leaks. Key specifications include an active area of 400 ft² (37 m²), a permeate flow rate of 12,500 gpd (47 m³/d) and a minimum salt rejection of 97.0%.

Specifications

FeatureValue / Technical Data
Active area400 ft² (37 m²)
Feed spacer thickness34 mil LDP (Low Differential Pressure)
Permeate flow rate12,500 gpd (47 m³/d)
Stabilized salt rejection> 97.0%
Minimum salt rejection97.0%
Membrane typePolypiperazine Thin-Film Composite
General specifications of the NF270-400/34i element.

Dimensions

DimensionImperialMetric
Net length (A)40.0 in1,016 mm
Diameter (B)7.9 in201 mm
Inner diameter (C)1.125 in ID29 mm ID
D (D)0.5 in12.7 mm
Mechanical dimensions of the module (single elements with iLEC endcaps measure 40.5 inches / 1,029 mm in overall length).

Operating limits for design

Maximum operating temperature113°F (45°C)
Maximum operating pressure600 psi (41 bar)
Maximum pressure drop per element15 psi (1.0 bar)
Maximum pressure drop per pressure vessel (minimum 4 elements)50 psi (3.5 bar)
pH range (continuous operation)3–10
pH range (short-term cleaning, 30 min)1–12
Maximum feed flow rate75 gpm (17 m³/h)
Maximum Silt Density Index (SDI)SDI 5
Free chlorine tolerance< 0.1 ppm

Important operation notes

  • Keep elements moist at all times after initial wetting.
  • Oxidation damage caused by free chlorine or other oxidizing agents is not covered under warranty; removal of free chlorine by pretreatment is recommended prior to membrane exposure.
  • Permeate obtained from the first hour of operation should be discarded.
  • Avoid static permeate-side backpressure at all times.
  • Use of this product does not in itself guarantee the removal of cysts and pathogens from water.

Private label and custom versions

The DuPont™ FilmTec™ NF270-400/34i element is ideal for municipal drinking water applications and wastewater reuse. Contact our team for commercial inquiries, customization options and technical support.

Need this membrane in your system?

We can adapt it to your plant, label it with your brand and support you through installation.

Request a quote

Similar membranes

Nano Filtration

NF90

Address

Via Caduti sul Lavoro, 6
61032 Fano (PU), Italy

Telephone

+39 0721 1797741