Integratec
MB-40
DuPont™ IntegraTec™ MB 40 Pressurized Ultrafiltration Module The DuPont™ IntegraTec™ MB 40 pressurized ultrafiltration module (formerly known as dizzer XL 1.5 MB 40 W) from the P Series uses advanced Multibore™ PES fiber technology, providing exceptional physical and chemical resistance and a unique design for high solids loads. Designed for open-platform applications on custom skids, […]
DuPont™ IntegraTec™ MB 40 Pressurized Ultrafiltration Module
The DuPont™ IntegraTec™ MB 40 pressurized ultrafiltration module (formerly known as dizzer XL 1.5 MB 40 W) from the P Series uses advanced Multibore™ PES fiber technology, providing exceptional physical and chemical resistance and a unique design for high solids loads. Designed for open-platform applications on custom skids, it is ideal for height-restricted or containerized solutions. Key specifications include an active membrane area of 40 m² (431 ft²) and a nominal membrane pore size of 0.02 μm.
Specifications
| Feature | Value / Technical Data |
|---|---|
| Part Number / GMID | IN-0069/12071517 |
| Filtration mode | In-Out Pressurized |
| Membrane type | Multibore |
| Membrane material | PESM |
| Nominal pore size | 0.02 μm |
| Module operating process | Dead-end |
| Housing material | PVC-U, white |
| Active membrane area | 40 m² (431 ft²) |
Dimensions
| Dimension | Metric | Imperial |
|---|---|---|
| Module length (L) | 1,485 ± 1.5 mm | 58.5 in |
| Distance between top/bottom feed ports (L1) | 1,599 ± 3.0 mm | 63.0 in |
| Length with end caps (L2) | 1,679 ± 3.0 mm | 66.1 in |
| Module diameter (A) | 250 ± 1.5 mm | 9.8 in |
| Distance from top feed port to filtrate port (B) | 190 ± 1.5 mm | 7.5 in |
| Maximum end cap coupling outer diameter (C) | 295 mm | 11.6 in |
| Filtrate / backwash port (D) | 50.8 mm | 2 in |
Operating limits for design
| Operating temperature range | 1–40°C (34–104°F) |
| Operating pH | 3–11 |
| Cleaning pH | 1–13 |
| Maximum inlet pressure | 5 bar (73 psi) |
| Maximum temperature change rate | 5°C/min (9°F/min) |
| Maximum allowable pressure change rate | 0.5 bar/s (7.3 psi/s) |
| NaOCl exposure (free chlorine tolerance) | ≤ 250,000 ppm×h (at pH ≥ 9.5) |
Important operation notes
- Avoid sudden pressure changes during start-up, operation, shutdown or cleaning sequences to prevent membrane damage (maximum allowable change 0.5 bar/s).
- For assembly, refer to the dedicated DuPont™ IntegraTec™ Pressurized UF In-Out P Series Modules for Open Platforms Assembly Instructions (Form No. 45-D02231-en).
- During prolonged system shutdowns, introduce a preservation solution to control biological growth, following the dedicated manual.
- Modules certified for drinking water require specific conditioning procedures before production.
- Failure to strictly follow the operating limits and guidelines voids any warranty.
Private label and custom versions
The DuPont™ IntegraTec™ MB 40 module can be integrated into customized open-platform solutions. Contact our team for commercial inquiries, customization options and technical support.
Need this membrane in your system?
We can adapt it to your plant, label it with your brand and support you through installation.