Via Caduti sul Lavoro, 6, 61032 Fano (PU), Italy +39 0721 1797741 info@ultramarwater.com
XLE-4021

Filmtec · Extra Low Energy

XLE-4021

DuPont™ FilmTec™ XLE-4021 Reverse Osmosis Element The DuPont™ FilmTec™ XLE-4021 reverse osmosis element is part of the brackish water element range for small commercial systems and is designed with extra low energy technology, operating at the industry’s lowest pressure to reduce energy costs and allow the use of lower-cost system components. Key specifications include a […]

Diameter
4″
Format
4021

DuPont™ FilmTec™ XLE-4021 Reverse Osmosis Element

The DuPont™ FilmTec™ XLE-4021 reverse osmosis element is part of the brackish water element range for small commercial systems and is designed with extra low energy technology, operating at the industry’s lowest pressure to reduce energy costs and allow the use of lower-cost system components. Key specifications include a permeate flow rate of 1,025 GPD (3.88 m³/d) and a stabilized salt rejection of 99.0%.

Specifications

FeatureValue / Technical data
Part number154540
Permeate flow rate1,025 GPD (3.88 m³/d)
Applied pressure100 psi (6.9 bar)
Stabilized salt rejection99.0%
Maximum feed flow rate14 gpm (3.2 m³/h)
Membrane typePolyamide Thin-Film Composite
General specifications of the XLE-4021 element.

Dimensions

DimensionImperialMetric
Length (A)14.0 in356 mm
Diameter (B)3.9 in99 mm
Permeate tube diameter (C)0.75 in19 mm
D1.05 in26.7 mm
Dimensions in inches (mm). 1 inch = 25.4 mm. The element fits pressure vessels with a 4-inch nominal inside diameter.

Operating limits for design

Maximum operating temperature113°F (45°C)
Maximum operating pressure600 psi (41 bar)
Maximum pressure drop per element13 psi (0.9 bar)
Maximum pressure drop per pressure vessel (maximum 2 elements)30 psi (2.1 bar)
pH range (continuous operation)2–11
pH range (short-term cleaning, 30 min)1–13
Maximum feed silt density index (SDI)SDI 5
Free chlorine tolerance< 0.1 ppm

Important operation notes

  • Keep elements moist at all times after initial wetting.
  • The maximum temperature for continuous operation above pH 10 is 95°F (35°C).
  • Oxidation damage caused by free chlorine or other oxidizing agents is not covered by the warranty; pretreatment to remove free chlorine is recommended.
  • Discard the permeate obtained during the first hour of operation.
  • Use of this product does not by itself guarantee the removal of cysts and pathogens from water.

Private label and custom versions

The DuPont™ FilmTec™ XLE-4021 element is ideal for small commercial systems that require very low pressure operation and reduced energy consumption. Contact our team for commercial inquiries, customization options and technical support.

Need this membrane in your system?

We can adapt it to your plant, label it with your brand and support you through installation.

Request a quote

Similar membranes

Extra Low Energy

XLE-2521

2.5″ (2521)

Extra Low Energy

XLE-440

8″ (8040)

Address

Via Caduti sul Lavoro, 6
61032 Fano (PU), Italy

Telephone

+39 0721 1797741