Via Caduti sul Lavoro, 6, 61032 Fano (PU), Italy +39 0721 1797741 info@ultramarwater.com
LC LE PRO-4040

Filmtec · Low Energy

LC LE PRO-4040

DuPont™ FilmTec™ LC LE PRO-4040 Reverse Osmosis Element The DuPont™ FilmTec™ LC LE PRO-4040 reverse osmosis element is designed for low-pressure applications under challenging water conditions, delivering high-quality water at low pressure thanks to innovative, proprietary technology. It offers an industry-leading active area (94 ft²) that reduces fouling through a lower operating flux while delivering […]

Diameter
4″
Format
4040

DuPont™ FilmTec™ LC LE PRO-4040 Reverse Osmosis Element

The DuPont™ FilmTec™ LC LE PRO-4040 reverse osmosis element is designed for low-pressure applications under challenging water conditions, delivering high-quality water at low pressure thanks to innovative, proprietary technology. It offers an industry-leading active area (94 ft²) that reduces fouling through a lower operating flux while delivering higher flow. Key specifications include a permeate flow rate of 2,600 GPD (9.8 m³/d) and a stabilized salt rejection of 99.5%.

Specifications

FeatureValue / Technical data
Part number12081512
Active area94 ft² (8.7 m²)
Permeate flow rate2,600 GPD (9.8 m³/d)
Stabilized salt rejection99.5%
Minimum salt rejection99.0%
Membrane typePolyamide Thin-Film Composite
General specifications of the LC LE PRO-4040 element.

Dimensions

DimensionImperialMetric
Length (A)40.0 in1,016 mm
B DIA3.9 in99 mm
Permeate tube outer diameter (C)0.75 in OD19 mm OD
D1.05 in27 mm
Dimensions in inches (mm). 1 inch = 25.4 mm. The element fits pressure vessels with a 4-inch nominal inside diameter.

Operating limits for design

Maximum operating temperature113°F (45°C)
Maximum operating pressure600 psi (41 bar)
Maximum pressure drop per element15 psi (1.0 bar)
Maximum pressure drop per pressure vessel (maximum 2 elements)30 psi (2.1 bar)
pH range (continuous operation)2–11
pH range (short-term cleaning, 30 min)1–13
Maximum feed flow rate16 gpm (3.6 m³/h)
Maximum feed silt density index (SDI)SDI 5
Free chlorine tolerance< 0.1 ppm

Important operation notes

  • Keep elements moist at all times after initial wetting.
  • The maximum temperature for continuous operation above pH 10 is 95°F (35°C).
  • Oxidation damage caused by free chlorine or other oxidizing agents is not covered by the warranty; pretreatment to remove free chlorine is recommended.
  • Discard the permeate obtained during the first hour of operation.
  • Use of this product does not by itself guarantee the removal of cysts and pathogens from water.

Private label and custom versions

The DuPont™ FilmTec™ LC LE PRO-4040 element is ideal for light industrial and drinking water applications in bottling plants, refill stations, hotels, schools and institutions that require stringent permeate quality. Contact our team for commercial inquiries, customization options and technical support.

Need this membrane in your system?

We can adapt it to your plant, label it with your brand and support you through installation.

Request a quote

Address

Via Caduti sul Lavoro, 6
61032 Fano (PU), Italy

Telephone

+39 0721 1797741