Via Caduti sul Lavoro, 6, 61032 Fano (PU), Italia +39 0721 1797741 info@ultramarwater.com
SW30XLE-400

Filmtec · Sea Water

SW30XLE-400

DuPont™ FilmTec™ SW30XLE-400 Seawater Reverse Osmosis Element The DuPont™ FilmTec™ SW30XLE-400 seawater reverse osmosis element delivers a low total cost of water by optimizing system energy consumption and productivity. It is ideal for municipal and industrial desalination plants with medium or high feed water salinity. Key specifications include an active area of 400 ft² (37 […]

Diametro
8″
Formato
8040

DuPont™ FilmTec™ SW30XLE-400 Seawater Reverse Osmosis Element

The DuPont™ FilmTec™ SW30XLE-400 seawater reverse osmosis element delivers a low total cost of water by optimizing system energy consumption and productivity. It is ideal for municipal and industrial desalination plants with medium or high feed water salinity. Key specifications include an active area of 400 ft² (37 m²), a permeate flow rate of 9,000 gpd (34 m³/d) and a stabilized salt rejection of 99.8%.

Specifications

FeatureValue / Technical Data
Active area400 ft² (37 m²)
Feed spacer thickness28 mil
Permeate flow rate9,000 gpd (34 m³/d)
Stabilized boron rejection91.5%
Stabilized salt rejection99.8%
Minimum salt rejection99.6%
Membrane typePolyamide Thin-Film Composite
General specifications of the SW30XLE-400 element.

Dimensions

DimensionImperialMetric
Length (A)40.0 in1,016 mm
Diameter (B)7.9 in201 mm
Inner diameter (C)1.125 in ID29 mm ID
Mechanical dimensions of the module.

Operating limits for design

Maximum operating temperature113°F (45°C)
Maximum operating pressure1,200 psi (83 bar)
Maximum pressure drop per element15 psi (1.0 bar)
Maximum pressure drop per pressure vessel (minimum 4 elements)50 psi (3.5 bar)
pH range (continuous operation)2–11
pH range (short-term cleaning, 30 min)1–13
Maximum Silt Density Index (SDI)SDI 5
Free chlorine tolerance< 0.1 ppm

Important operation notes

  • Keep elements moist at all times after initial wetting.
  • The maximum temperature for continuous operation above pH 10 is 95°F (35°C).
  • Oxidation damage caused by free chlorine or other oxidizing agents is not covered under warranty.
  • Permeate obtained from the first hour of operation should be discarded.
  • Use of this product does not in itself guarantee the removal of cysts and pathogens from water; effectiveness depends on the overall system design and maintenance.

Private label and custom versions

The DuPont™ FilmTec™ SW30XLE-400 element is ideal for municipal and industrial seawater desalination plants. Contact our team for commercial inquiries, customization options and technical support.

Ti serve questa membrana nel tuo impianto?

Possiamo adattarla al tuo impianto, personalizzarla con il tuo marchio e seguirti nell'installazione.

Richiedi un preventivo

Membrane simili

Indirizzo

Via Caduti sul Lavoro, 6
61032 Fano (PU), Italia