Via Caduti sul Lavoro, 6, 61032 Fano (PU), Italien +39 0721 1797741 info@ultramarwater.com
XULP-2540-ULTRAMAR-WATER

Ultramar Water · Extreme Ultra Low Pressure

XULP-2540-ULTRAMAR-WATER

XULP-2540 brackish water reverse osmosis membrane The XULP-2540 is a 2.5-inch spiral wound brackish water reverse osmosis membrane engineered for low or ultra-low pressure brackish water treatment applications. Delivering an optimal balance of low pressure operation and high productivity, this element is designed for original equipment manufacturers (OEMs), system builders, and service centers. Key operational […]

Durchmesser
2,5″
Format
2540

XULP-2540 brackish water reverse osmosis membrane

The XULP-2540 is a 2.5-inch spiral wound brackish water reverse osmosis membrane engineered for low or ultra-low pressure brackish water treatment applications. Delivering an optimal balance of low pressure operation and high productivity, this element is designed for original equipment manufacturers (OEMs), system builders, and service centers. Key operational data includes a permeate flow of 758 GPD (2.9 m³/day), an active membrane area of 27 ft² (2.5 m²), and a stabilized salt rejection of 99.2%.

Specifications

ModelPermeate Flow GPD (m³/day)Active Membrane Area ft² (m²)Stabilized Salt RejectionFeed Spacer mil (mm)Test Conditions
XULP-2540758 (2.9)27 (2.5)99.2%28 (0.7)100 psi / 500 ppm NaCl
1. All performance data are collected at 25°C (77°F), pH 7.5 and 15% recovery rate. 2. Permeate flow for a single element may vary ±15%.

Dimensions

ModelOverall Length (A)Permeate Tube Extension (B)Diameter (C)
XULP-254040.0 (1016)1.05 (26.7)2.4 (61)
Dimensions in inches (mm). 1 inch = 25.4 mm. Permeate tube diameter is 0.75 in (19 mm).

Operating limits for design

Maximum Operating Temperature45°C (113°F)
Maximum Operating Pressure600 psi (41 bar)
Maximum Pressure Drop (single element)15 psi (1.0 bar)
pH Range for Continuous Operation2–11
pH Range for Cleaning2–12
Chlorine Tolerance< 0.1 ppm
Maximum Feed SDI5

Important operation notes

  • Discard the permeate produced during the first hour of use.
  • Keep elements moist at all times after initial wetting.
  • During prolonged shutdowns, store elements in a preservative solution to prevent biological growth, and rinse it out before use.
  • The OEM is responsible for the effects of incompatible chemicals and lubricants on the elements.
  • Failure to follow these operating limits voids the limited warranty.

Private label and custom versions

The XULP-2540 is available under your brand. Contact our team for volumes, labeling and custom specifications.

Benötigen Sie diese Membran für Ihre Anlage?

Wir passen sie an Ihre Anlage an, versehen sie mit Ihrer Marke und begleiten Sie bei der Installation.

Angebot anfordern

Ähnliche Membranen

Adresse

Via Caduti sul Lavoro, 6
61032 Fano (PU), Italien