Via Caduti sul Lavoro, 6, 61032 Fano (PU), Italien +39 0721 1797741 info@ultramarwater.com
SW30XFR-400/34

Filmtec · Sea Water

SW30XFR-400/34

DuPont™ FilmTec™ SW30XFR-400/34 Seawater Reverse Osmosis Element The DuPont™ FilmTec™ SW30XFR-400/34 seawater reverse osmosis element is designed to offer excellent fouling resistance and an optimal balance between permeate quality and energy consumption under difficult or high-fouling feed conditions. Key specifications include an active area of 400 ft² (37 m²), a permeate flow rate of 7,500 […]

Durchmesser
8″
Format
8040

DuPont™ FilmTec™ SW30XFR-400/34 Seawater Reverse Osmosis Element

The DuPont™ FilmTec™ SW30XFR-400/34 seawater reverse osmosis element is designed to offer excellent fouling resistance and an optimal balance between permeate quality and energy consumption under difficult or high-fouling feed conditions. Key specifications include an active area of 400 ft² (37 m²), a permeate flow rate of 7,500 gpd (28 m³/d) and a stabilized salt rejection of 99.8%.

Specifications

FeatureValue / Technical Data
Active area400 ft² (37 m²)
Feed spacer thickness34 mil
Permeate flow rate7,500 gpd (28 m³/d)
Stabilized boron rejection92%
Stabilized salt rejection99.8%
Minimum salt rejection99.65%
Membrane typePolyamide Thin-Film Composite
General specifications of the SW30XFR-400/34 element.

Dimensions

DimensionImperialMetric
Length (A)40.0 in1,016 mm
Diameter (B)7.9 in201 mm
Inner diameter (C)1.125 in ID29 mm ID
Mechanical dimensions of the module.

Operating limits for design

Maximum operating temperature113°F (45°C)
Maximum operating pressure1,200 psi (83 bar)
Maximum pressure drop per element15 psi (1.0 bar)
Maximum pressure drop per pressure vessel (minimum 4 elements)50 psi (3.5 bar)
pH range (continuous operation)2–11
pH range (short-term cleaning, 30 min)1–13
Maximum Silt Density Index (SDI)SDI 5
Free chlorine tolerance< 0.1 ppm

Important operation notes

  • Keep elements moist at all times after initial wetting.
  • The maximum temperature for continuous operation above pH 10 is 95°F (35°C).
  • The presence of free chlorine and other oxidizing agents causes oxidation damage that is not covered under warranty.
  • Permeate obtained from the first hour of operation should be discarded.
  • Use of this product does not in itself guarantee the removal of cysts and pathogens from water; effectiveness depends on the overall system design and maintenance.

Private label and custom versions

The DuPont™ FilmTec™ SW30XFR-400/34 element can be integrated into standard seawater treatment systems with difficult feed conditions. Contact our team for commercial inquiries, customization options and technical support.

Benötigen Sie diese Membran für Ihre Anlage?

Wir passen sie an Ihre Anlage an, versehen sie mit Ihrer Marke und begleiten Sie bei der Installation.

Angebot anfordern

Ähnliche Membranen

Adresse

Via Caduti sul Lavoro, 6
61032 Fano (PU), Italien